+971 58 558 1295 ENTR Request a Quote
Electric sauna heater filled with stones in front of a split-stone feature wall, with timber benches beside it

[ Blog ]

Cryotherapy Chamber in Doha: Planning the Room for a Club, Clinic or Villa in Qatar

A cryotherapy chamber in Doha in 6 decisions: electric or nitrogen cabin, room size, power from the Kahramaa supply, coastal humidity, extract and service.

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

TopicCryotherapy Chamber in Doha
Reading7 minutes
Sections8
Published18 November 2026
Updated

Sauna Dekor Spa Solutions engineering team, Istanbul · project and press enquiries: Alican Aykaç, Managing Partner

Updated: 18 November 2026

Short answer: a cryotherapy chamber in Doha is planned in 6 decisions: cabin type, room, power, humidity, extract and service access. An electric single-person cabin such as the CryoOne needs about 1.2 m² plus space for its cooling aggregate. Sauna Dekor Spa Solutions plans and installs these rooms in Qatar, coordinated from our Dubai office.

This guide is for members' clubs, gyms, clinics, hotel spas and villa owners in Doha and the rest of Qatar. It covers the room around the cabin, not what a session does to the body: we make no health claims, and the cabin manufacturer's instructions govern use. In Qatar we are represented by our representative office in Doha; our wider work in the country is on the Doha page.

Villa sauna with pale timber benches and light strips, a stone heater in a timber guard and a glass door looking out to the next room
A villa sauna in Doha, seen from inside towards its glass door. A cryo cabin usually sits on the same floor as wellness rooms like this, behind its own door. Project photograph; private client, not named.

Electric or nitrogen: which cabin type suits a Doha building?

In most Doha towers, clubs and villas we start with an electric cabin, because it needs no nitrogen tank, gas line or tank room. The CryoOne in our IMMO range is electric and nitrogen-free, reaches down to −85 °C on the manufacturer's data, takes 1 person and runs 2–3 minute sessions.

A nitrogen cabin is a different project. It needs regular liquid gas deliveries, a storage position the building management accepts, and oxygen monitoring in the room, because nitrogen displaces the oxygen people breathe. In a tower with a shared service lift, that delivery route alone can decide the choice. Our cryotherapy equipment page lists 8 models with their published data.

Electric or nitrogen: which cabin type suits a Doha building?
QuestionElectric cabinNitrogen cabin
Gas supplynoneliquid nitrogen deliveries and storage
Building approvalelectrical load and accesselectrical load, access, gas storage and delivery route
Room safetyheat from the aggregate is ventilatedoxygen monitoring and extract, set by the maker
Spacecabin plus aggregatecabin plus tank position

How big is the room for a cryotherapy chamber in Doha?

Big enough for the cabin, its aggregate, a clear path to the door and a place to change. The CryoOne footprint is about 1.2 m² plus the aggregate, according to the CryoOne data sheet. Multi-person chambers need much more, so we choose the model first and draw the room around it.

On the survey we check 3 points: the floor slab carries the cabin, the door and lift take it in, and a technician can reach the aggregate without moving the cabin. In apartment towers the lift size is often the real limit, so it is measured before the model is confirmed.

What power does a cryo cabin need in Qatar?

A dedicated circuit sized by a licensed electrician from the manufacturer's data sheet, with the protection the maker specifies and an isolator within reach of the service technician. In Qatar the supply comes from Kahramaa, so any increase in the building's load is agreed with the utility through the building's electrical contractor. We send the load data in week 1.

In a club that already runs saunas, steam rooms and pool plant, the board is usually the limit, not the room. The electrician confirms that the cabin and the existing heat rooms can run at the same time before the order is placed.

Club sauna with long timber benches, a fibre-optic star ceiling, a split-stone feature wall and a stone-filled heater in the corner
The sauna at the Diplomatic Club in Doha, delivered in 2022. Every heated and cooled room on a wellness floor draws from one board, so the loads are added up first. Project photograph.

How does Doha's coastal humidity change the cryo room?

Doha sits on the Gulf coast, and in summer the outdoor air is both hot and humid. Cold surfaces in a room that takes in that air collect condensation, so the cryo room needs 1 dedicated extract route and air that the building's system has already dried. We plan dehumidification with the MEP engineer before the room is finished.

The cabin room is also kept apart from steam rooms and hammams, with its own door, so moist air from wet rooms does not reach the refrigeration unit. As a rule on every floor we plan, wet rooms and cold rooms are not mixed on one extract.

Steam room seen from above, with grey glass mosaic walls and benches, a terrazzo floor with a lit edge and a floor drain
A steam room at the Diplomatic Club in Doha, 2022: wet rooms keep their own air route, away from refrigeration equipment. Project photograph.

Where does a cryo room fit in a club, clinic or villa?

On the same corridor as the other heat and cold rooms, so users move between them without crossing changing rooms. A typical sequence in a Doha club is sauna, cold plunge or experience shower, cryo cabin and rest area. We build cold plunge pools for water temperatures from 2 to 15 °C, each with its own plant.

In a villa the cryo cabin usually goes in a basement or ground-floor wellness room, next to a sauna and a shower. The Diplomatic Club project page shows how a club floor in Doha groups saunas, steam rooms, the hot tub and the pool hall, and our guide to contrast therapy shows the hot-and-cold circuit as a layout.

Round walk-in experience shower lined in pale mosaic with a round ceiling rain head and a wall control panel
An experience shower in a private villa in Doha. In a villa wellness room, a cryo cabin sits next to rooms like this, behind its own door. Project photograph; private client, not named.

In what order is a cryotherapy room delivered in Qatar?

In 6 steps, from model choice to handover. The cabin is produced while the room is prepared.

  1. Model choice: electric or nitrogen, single or multi-person, from published data.
  2. Survey: slab, lift and door sizes, board capacity, extract route.
  3. Drawing: cabin, aggregate, service clearance, door and changing point.
  4. Site preparation: circuit, isolator, extract, dehumidified air and finished floor.
  5. Delivery, placing and connection.
  6. Commissioning and handover with the operator's team, following the maker's manual.

The room checklist is on our cryotherapy room page, and the background is in our article on cryotherapy. For a project in Riyadh, see the same room in Saudi Arabia.

Sauna Dekor Spa Solutions is a sauna, steam room, hammam and pool manufacturer since 1987: 40 years of manufacturing in Istanbul, a team of 19, TS EN ISO 9001:2015, and 5,000+ projects in 41+ countries, including 577+ hotel and resort projects, with 732 documented references in 32 countries and territories. Every project carries 24 months on workmanship and manufacturing, 24 months manufacturer's warranty on electrical and mechanical equipment, and 5 years on structure and waterproofing. We keep spare parts in stock in Istanbul for the equipment we install. Equipment is made by its manufacturers, whose certification belongs to them. Projects in Qatar are coordinated from our Dubai office (Latifa Tower, World Trade Centre) and represented by our representative office in Doha.

Frequently asked questions about a cryotherapy chamber in Doha

Does an electric cryo cabin need a nitrogen supply?


No. An electric cabin such as the CryoOne cools with its own refrigeration aggregate, so there is no nitrogen tank, gas line or tank room. The room needs a dedicated circuit, extract for the aggregate's heat and access for service.

Can a cryo cabin go in a Doha apartment or villa?


Often yes, if the slab, the lift or door and the electrical board allow it. In towers we also need the building management's approval for the load and the works. We check these points on the survey before confirming a model.

How much space does a cryotherapy chamber need?


It depends on the model. The CryoOne needs about 1.2 m² plus its aggregate, on the manufacturer's data. Larger chambers need much more floor, so the model is chosen first and the room is drawn around it.

Why does humidity matter for a cryo room in Qatar?


Humid coastal air condenses on cold surfaces. The room therefore takes air that the building system has already dried, has its own extract, and stays separate from steam rooms so moist air does not reach the refrigeration unit.

Who services the cabin after handover?


The refrigeration unit is serviced according to the manufacturer's manual, and contact surfaces are wiped between sessions. IMMO equipment carries a 2-year warranty, and we keep spare parts in stock in Istanbul for the equipment we install.

Do you work outside Doha in Qatar?


Yes. Projects anywhere in Qatar are coordinated from our Dubai office and represented by our representative office in Doha. Our own team places, connects and commissions the cabin and hands it over to the operator.

Sources

  • Kahramaa — Qatar General Electricity and Water Corporation, the national electricity and water supplier.
  • Climate of Qatar — Wikipedia. Hot, humid coastal summers.
  • Cryotherapy — Wikipedia. Overview of cold cabins and chambers.
  • Vapor-compression refrigeration — Wikipedia. How an electric aggregate produces cold and rejects heat.
  • Liquid nitrogen — Wikipedia. Handling and storage of the gas used in nitrogen cabins.
  • Inert gas asphyxiation — Wikipedia. Why rooms with nitrogen equipment need oxygen monitoring.

Our work

From our spa projects

Alican Aykaç, Managing Partner, Sauna Dekor
[ Author ]

Alican Aykaç · Managing Partner, Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions has designed, manufactured and installed saunas, steam rooms, hammams and pools since 1987, in its own facility in İkitelli OSB, Istanbul: 5,000+ projects in 41+ countries, including 577+ hotel and resort projects.

About Alican Aykaç

[ Related applications ]

Planning a room like this?

Send us the drawing or the room size. We will work out the heater, ventilation and finishes the room needs.

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+971 58 558 1295Call Dubai+971 58 558 1295Request a quote