Closed hyperbaric capsule, angled product view

Coral PodRequest a quote

Coral PodIMMO

Hyperbaric & IHHT · IMMO Longevity

Compact single-guest hyperbaric chamber for small-room footprints; 0.5–1.5 bar, pressure-vessel certified.

Pressure: 0.5–1.5 bar
Session: 45 min
Footprint: Treatment-room scale
Format: Compact single
Certificate: Pressure-vessel certified

Request a quote

IMMO Longevity · Hyperbaric & IHHT

Sauna Dekor has manufactured saunas, Turkish hammams, steam rooms, salt rooms and pools at its own facility in İkitelli OSB, Istanbul, since 1987: 5,000+ projects in 41+ countries.

Technical specifications

Coral Pod specifications

The values are taken from the manufacturer's published product information.

Pressure: 0.5–1.5 bar
Session: 45 min
Footprint: Treatment-room scale
Format: Compact single
Certificate: Pressure-vessel certified
Guests: 1
Position: Upright seating
Oxygen flow: 93 % (±3 %) purity
Control interface: Coral Control tablet app (run by the operator)
Front: Curved glazed front — daylight and a view out
Interior: Quilted cream interior, perforated leather seat, single entry point
Power supply: Standard socket — no special electrical infrastructure
Platform: The same single-guest platform as the Coral One, with an upright position
Maintenance: Single-door access, wipe-clean interior surfaces
Technical room: 1 × air compressor · 1 × air cooler · 1 × oxygen concentrator
Safety: Automatic locks, emergency stop, pressure monitoring
Pressure-vessel certificate: CE / 2014/68/EU PED; production chain compliant with ASME and ISO
Certificates (product family): Manufacturer's certificates: PED 2014/68/EU · ASME PVHO-1 · ISO 13485 · CE marking
Made in: Istanbul, Türkiye

Key features

What the Coral Pod offers

Compact single-guest format

The footprint fits a single small room. Sauna Dekor assembles the pod on site.

0.5–1.5 bar, 45-minute sessions

Pressure range as listed by the manufacturer; a session lasts 45 minutes.

Installation and use

Why this equipment

For rooms short of space

Clinics and studios can convert an existing room.

Site requirements

A floor-load check, a place for the oxygen concentrator and installation to the pressure-vessel documentation.

Where it is used

Clinics and studios that convert an existing small room.

Maintenance and warranty

Periodic inspections follow the pressure-vessel documentation and the manufacturer's manual. IMMO equipment carries a 2-year warranty; Sauna Dekor delivers, places, connects and commissions it.

Installation notes

Installing the Coral Pod

Treatment-room scale

The Pod is single-guest and compact: it fits an existing treatment room, a wellness studio or a dedicated corner at home. The size goes down; the pressure range does not.

Upright seating

The guest sits upright. This layout suits shorter sessions and daytime use, and needs less floor space than the reclined model. Sauna Dekor assembles the Pod on site.

Technical room

Every installation needs a separate technical room outside the cabin. It holds the air compressor, air cooler and oxygen concentrator; together they keep the cabin at a constant pressure and temperature throughout the session. The concentrator separates oxygen from the air, so there are no cylinders and no refill cycle — the point operators ask about most. We fix the position and ventilation of the technical room with you at the site survey; finding space for it later is the most expensive item in an installation.

Oxygen and pressure

The Pod works between 0.5 and 1.5 bar, in fine steps. The flow supplied to the cabin is 93 % (±3 %) pure. The operator sets the session protocol; the unit stays within that range.

Safety

Safety systems

As specified by the manufacturer for the whole range.

Automatic oxygen-to-air switch-over

The in-cabin monitoring switches automatically from oxygen to ambient air as soon as it detects a value outside the set range.

Emergency release inside and out

Each cabin opens from both sides: the guest can release the door from inside, and the operator can do the same from outside without a key sequence.

Live oxygen concentration sensor

Oxygen purity is monitored in real time throughout the session; every data point is logged for the operator on the Coral Control tablet.

Continuous camera monitoring

The in-cabin camera feed goes to the operator's tablet, so visual contact is kept from start to finish, alongside a two-way intercom.

Closed-loop regulator system

Gas paths are fully sealed and isolated. The regulator takes in clean air and releases used air; the two do not mix, which keeps the risk of cabin contamination low.

CE-certified pressure vessel

Each cabin is designed and certified to the 2014/68/EU Pressure Equipment Directive; the production chain follows ASME and ISO requirements.

Certification

Certificates

PED 2014/68/EU — EU Pressure Equipment Directive
ASME PVHO-1 — pressure vessels for human occupancy
ISO 13485 — the manufacturer's quality management
CE marking applied by the manufacturer

The certificates are the manufacturer's and apply to the product range as published.

Gallery

Coral Pod images

Frequently asked

Common questions

What are the main specifications of the Coral Pod?

Pressure: 0.5–1.5 bar; Session: 45 min; Footprint: Treatment-room scale; Format: Compact single; Certificate: Pressure-vessel certified. Values are from the manufacturer's published product information.

What does installing the Coral Pod require?

Chambers need a floor-load check, a place for the oxygen concentrator and installation to the pressure-vessel documentation. Published values for the Coral Pod: dimensions Treatment-room scale.

Who delivers and installs the Coral Pod?

Sauna Dekor delivers, places, connects and commissions the Coral Pod as part of the rooms it designs and builds. The product and its certificates are the manufacturer's.

Where is the Coral Pod used?