+971 58 558 1295 ENTR Request a Quote
Hyperbaric capsule with timber-clad body, side view
Coral One, product view 2
Coral One, product view 3
Coral One, IMMO Longevity product image 4

Coral OneIMMO

Hyperbaric & IHHT · IMMO Longevity

Single-guest hyperbaric chamber in a fully reclined position; 0–1.0 bar, pressure-vessel certified.

Pressure
0–1.0 bar, adjusted in fine steps
Position
Fully reclined
Format
Single-guest
Certificate
Pressure-vessel certified
Request a quote

IMMO Longevity · Hyperbaric & IHHT

Sauna Dekor has manufactured saunas, Turkish hammams, steam rooms, salt rooms and pools at its own facility in İkitelli OSB, Istanbul, since 1987: 5,000+ projects in 41+ countries.

Technical specifications

Coral One specifications

The values are taken from the manufacturer's published product information.

Coral One
Pressure
0–1.0 bar, adjusted in fine steps
Position
Fully reclined
Format
Single-guest
Certificate
Pressure-vessel certified
Guests
1
Oxygen flow
93 % (±3 %) purity
Control interface
Coral Control tablet app
Design life
25 years (manufacturer's design life)
Mobility
On castors — passes through residential doors and can be moved without a new installation
Power supply
Standard socket
Front window
Wide panoramic acrylic window that lets daylight in
Interior
Quilted upholstery (bronze), built-in tablet
Climate
Integrated climate control; quiet mechanical shell
Technical room
1 × air compressor · 1 × air cooler · 1 × oxygen concentrator (sized for repeated sessions)
Settings
Homes, studios, clinics
Safety
Automatic locks, emergency stop, pressure monitoring
Pressure-vessel certificate
CE / 2014/68/EU PED; production chain compliant with ASME and ISO
Certificates (product family)
Manufacturer's certificates: PED 2014/68/EU · ASME PVHO-1 · ISO 13485 · CE marking
Made in
Istanbul, Türkiye

Key features

What the Coral One offers

01

Single guest, fully reclined

A one-person chamber used lying down.

02

0–1.0 bar in fine steps

Pressure range as listed by the manufacturer.

Installation and use

Why this equipment

01

Low body, quiet running

It fits rooms with limited ceiling height and runs quietly enough for neighbouring rooms.

02

Site requirements

A floor-load check, a place for the oxygen concentrator and installation to the pressure-vessel documentation.

03

Where it is used

Clinics and hotel spas, including rooms with a limited ceiling height.

04

Maintenance and warranty

Periodic inspections follow the pressure-vessel documentation and the manufacturer's manual. IMMO equipment carries a 2-year warranty; Sauna Dekor delivers, places, connects and commissions it.

Installation notes

Installing the Coral One

01

Fully flat at 180°

The One is the flattest model in the range: the guest lies fully flat. This layout is chosen for long sessions and rest-focused protocols.

02

Single guest

Designed for individual use; it is the model we are asked about most for homes and boutique facilities.

03

Technical room

Every installation needs a separate technical room outside the cabin. It holds the air compressor, air cooler and oxygen concentrator; together they keep the cabin at a constant pressure and temperature throughout the session. The concentrator separates oxygen from the air, so there are no cylinders and no refill cycle — the point operators ask about most. We fix the position and ventilation of the technical room with you at the site survey; finding space for it later is the most expensive item in an installation.

04

Oxygen and pressure

The One works between 0 and 1.0 bar, in fine steps. The flow supplied to the cabin is 93 % (±3 %) pure. The operator sets the session protocol; the unit stays within that range.

Safety

Safety systems

As specified by the manufacturer for the whole range.

01

Automatic oxygen-to-air switch-over

The in-cabin monitoring switches automatically from oxygen to ambient air as soon as it detects a value outside the set range.

02

Emergency release inside and out

Each cabin opens from both sides: the guest can release the door from inside, and the operator can do the same from outside without a key sequence.

03

Live oxygen concentration sensor

Oxygen purity is monitored in real time throughout the session; every data point is logged for the operator on the Coral Control tablet.

04

Continuous camera monitoring

The in-cabin camera feed goes to the operator's tablet, so visual contact is kept from start to finish, alongside a two-way intercom.

05

Closed-loop regulator system

Gas paths are fully sealed and isolated. The regulator takes in clean air and releases used air; the two do not mix, which keeps the risk of cabin contamination low.

06

CE-certified pressure vessel

Each cabin is designed and certified to the 2014/68/EU Pressure Equipment Directive; the production chain follows ASME and ISO requirements.

Certification

Certificates

  • PED 2014/68/EU — EU Pressure Equipment Directive
  • ASME PVHO-1 — pressure vessels for human occupancy
  • ISO 13485 — the manufacturer's quality management
  • CE marking applied by the manufacturer

The certificates are the manufacturer's and apply to the product range as published.

Gallery

Coral One images

Frequently asked

Common questions

What are the main specifications of the Coral One?

Pressure: 0–1.0 bar, adjusted in fine steps; Position: Fully reclined; Format: Single-guest; Certificate: Pressure-vessel certified. Values are from the manufacturer's published product information.

What does installing the Coral One require?

Chambers need a floor-load check, a place for the oxygen concentrator and installation to the pressure-vessel documentation.

Who delivers and installs the Coral One?

Sauna Dekor delivers, places, connects and commissions the Coral One as part of the rooms it designs and builds. The product and its certificates are the manufacturer's.

Where is the Coral One used?

Clinics and hotel spas, including rooms with a limited ceiling height.

What maintenance does the Coral One need, and what is the warranty?

Periodic inspections follow the pressure-vessel documentation and the manufacturer's manual. IMMO equipment carries a 2-year warranty; Sauna Dekor delivers, places, connects and commissions it.

Rooms we build with this equipment: Hyperbaric suites · All hyperbaric & IHHT models

Is the Coral One right for your project?

Send the room dimensions, the number of users and the available electrical supply; we will check the fit with you.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

WhatsApp Call now