+971 58 558 1295 ENTR Request a Quote
Hotel spa hammam in black mosaic with heated benches either side of a lit pebble water wall

[ Blog ]

Wellness Center in Riyadh: Planning the Rooms, Plant and Flow

A wellness center in Riyadh planned in 6 decisions: the room programme, guest flow, plant room, power to SBC 401, water and air, and the order of works.

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

TopicWellness Center in Riyadh
Reading7 minutes
Sections8
Published17 November 2026
Updated

Sauna Dekor Spa Solutions engineering team, Istanbul · project and press enquiries: Alican Aykaç, Managing Partner

Updated: 21 November 2026

Short answer: a wellness center in Riyadh is planned in 6 decisions, starting with the room programme and ending with the order of works. The hot rooms run at fixed values, a Finnish sauna at 80–100 °C and a steam room at 40–50 °C, so power, water and air are sized before design. Sauna Dekor Spa Solutions delivered a wellness club project for Next Wellness Club in Al Khobar in 2024.

This guide is for developers, club operators, hotel teams and their architects in Riyadh and the rest of the Kingdom. It covers the building side of a wellness center: which rooms, in what order, and what each room needs behind the wall. For the wider Saudi picture, codes and the projects we have delivered, see our Riyadh page.

Dark timber sauna with tiered benches, lit bench edges and a thermo-hygrometer on the wall
A dry-heat room with tiered benches and lit bench edges: in a center, the sauna is sized for the guest numbers before the plant room is drawn. Project photograph; project not named.

Which rooms does a wellness center in Riyadh need?

Most centers start from 4 groups of rooms: heat (sauna, steam room, hammam), cold (cold plunge or ice fountain), water (pool or spa pool) and rest (relaxation lounge and treatment rooms). Changing rooms and a plant room serve all of them. The mix is set by who uses the center and how many people arrive in the busiest hour.

A members' club needs more lockers and showers than a hotel, because members arrive at the same times. A hotel needs fewer lockers but more treatment rooms. Write the programme as a list of rooms with a guest number for each before any drawing starts.

Which rooms does a wellness center in Riyadh need?
RoomOperating valueWhat it needs behind the wall
Finnish sauna80–100 °C, dry airdedicated circuit, fresh-air inlet and extract
Bio sauna50–65 °Csame as the sauna, lower heater output
Steam room40–50 °C, close to 100 % humiditysteam generator, water feed, drain, sealed walls
Turkish hammamroom air 40–50 °Cheated platform, steam, drains, waterproofing
Cold plunge2–15 °C waterchiller, filtration, drain
Spa poolabout 30 °C waterplant room, balance tank, treatment

How should guests move through the center?

In 1 direction: reception, changing rooms, showers, then the thermal area, then rest. Guests should never walk back through the changing rooms in wet feet or cross a dry corridor to reach a cold room. A loop of 3 steps, heat, cold and rest, repeated, is the pattern most centers draw around.

Separate wet and dry zones on the plan. The sauna and the relaxation lounge are dry; the steam room, hammam, showers and plunge are wet. Where the two meet, a shower or a short wet corridor sits in between. Our page on thermal suites shows how hotels order the same rooms.

How much space should the plant room get?

Enough for every pump, filter, steam generator and chiller to be reached for service, with a floor drain and its own ventilation. Plant rooms are the space most often cut late in design, and 1 missing metre at that stage usually means equipment placed in a ceiling void that nobody can reach later.

Keep the plant room close to the wet rooms it serves, so steam lines and pool pipes stay short. A center with a pool, a plunge and two steam rooms usually needs a plant room drawn as a room, not as a cupboard. The equipment list and access widths are set out in our guide to the spa plant room.

Marble hammam with a central heated platform, turquoise mosaic niches, kurna basins and a lit ceiling dome
A residence hammam with a heated central platform: the platform heating, basin feeds and floor drains are fixed in the slab before any marble is laid. Project photograph; project not named.

What power and approvals does a wellness center need in Saudi Arabia?

Each heater, steam generator and chiller needs its own circuit, sized by a licensed electrician from the maker's datasheet, with residual-current protection. Electrical work follows SBC 401, the electrical part of the Saudi Building Code 2024, and IEC 60364-7-703 for rooms with sauna heaters. Many heaters above about 9 kW need a 3-phase supply.

Imported heaters, generators and controls are registered on SASO's SABER platform before they clear customs. On our Saudi projects we handle that registration as part of the package, so the equipment programme does not wait at the port. Heater sizing is explained in our guide to sauna heater sizing.

What changes because of Riyadh's water and climate?

2 things: hard water and summer heat. Hard water leaves scale in steam generators and on pool surfaces, so water treatment is drawn into the plant room from the start. On the coast the ground and the salt air matter more; see swimming pools in Jeddah and Dammam. Summer heat warms incoming water, so a cold plunge that must hold 2–15 °C needs a chiller sized for the hottest months, not for the winter.

Riyadh's air is dry, which helps saunas dry out between sessions. It does not help the wet rooms: steam rooms and hammams still need full waterproofing and a vapour-tight build-up, because the moisture problem comes from inside the room, not from the city. The cold side is covered in our cold plunge pool planning guide.

Hotel hammam with white marble walls, an octagonal marble platform and marble wall benches
An octagonal heated platform in a hotel hammam: in a busy center the platform size follows the number of guests in the peak hour. Project photograph; project not named.

In what order is a wellness center built?

In 6 stages, and the first 2 happen before the contractor is on site. Large spa projects run up to 6 months; a single sauna takes 1.5–12 weeks from order to use, depending on its size. The thermal rooms are made in Istanbul while the shell and services are finished, so they arrive when the rooms can take them.

  1. Room programme and guest numbers for the busiest hour.
  2. Layout drawings: zoning, flow, plant room and service routes.
  3. Services: circuits, water feeds, drains, steam lines and air routes in the slab and walls.
  4. Waterproofing and testing of every wet room before tiling.
  5. Installation of the cabins, generators, chillers, pools and controls.
  6. Commissioning and handover to the operator: settings, cleaning and service plan.

For how a wellness center differs from a longevity clinic in its rooms, see longevity center vs wellness center. The Dubai version of this guide is on our wellness center in Dubai page.

Sauna Dekor Spa Solutions is a sauna, steam room, hammam and pool manufacturer since 1987: 40 years of manufacturing in Istanbul, a team of 19, TS EN ISO 9001:2015, and 5,000+ projects in 41+ countries, including 577+ hotel and resort projects, with 732 documented references in 32 countries and territories. Every project carries 24 months on workmanship and manufacturing, 24 months manufacturer's warranty on electrical and mechanical equipment, and 5 years on structure and waterproofing. We keep spare parts in stock in Istanbul for the equipment we install. Equipment is made by its manufacturers, whose certification belongs to them. Projects in Saudi Arabia are coordinated from our Dubai office (Latifa Tower, World Trade Centre).

Frequently asked questions about a wellness center in Riyadh

How long does it take to build a wellness center in Riyadh?


Large spa projects take up to 6 months from the start of works, depending on the room programme. A single sauna takes 1.5–12 weeks from order to use, depending on its size. Import registration and plant room equipment are planned into the same programme.

Which rooms should a small wellness center start with?


Usually a sauna, a steam room, a cold plunge, showers and a relaxation lounge. That gives a full heat, cold and rest loop in a compact plan. A hammam or a pool can be added later if the plant room was sized for it.

Have you built wellness projects in Saudi Arabia?


Yes. We delivered a project for Next Wellness Club in Al Khobar in 2024, and a sauna and hammam for a private villa in Riyadh the same year. Our teams travel to site for installation and commissioning.

Do you work with the project's architect and MEP engineer?


Yes. We give the architect the room sizes and finishes, and the MEP engineer the loads, water feeds, drains and air volumes for every room. Most problems in wellness centers start where those two sets of drawings do not match.

Can a wellness center be added to an existing building?


Often yes, if the floor can take the wet rooms' loads and drains can be routed. The plant room and the steam routes are checked first. A survey of the slab, risers and board capacity decides what fits before any layout is drawn.

What maintenance does the thermal area need?


Daily cleaning and drying of the rooms, regular descaling of steam generators, water testing for pools and plunges, and an annual check of heaters and controls. We hand over a service plan with the rooms and keep spare parts in stock in Istanbul.

Our work

From our spa projects

Alican Aykaç, Managing Partner, Sauna Dekor
[ Author ]

Alican Aykaç · Managing Partner, Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions has designed, manufactured and installed saunas, steam rooms, hammams and pools since 1987, in its own facility in İkitelli OSB, Istanbul: 5,000+ projects in 41+ countries, including 577+ hotel and resort projects.

About Alican Aykaç

Planning a room like this?

Send us the drawing or the room size. We will work out the heater, ventilation and finishes the room needs.

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+971 58 558 1295Call Dubai+971 58 558 1295Request a quote