+971 58 558 1295 ENTR Request a Quote
CryoOne electric whole-body cryotherapy cabin in navy blue, with a glazed door, a lit interior and a touch control panel on the side

[ Blog ]

Cryotherapy Chamber in Riyadh: Planning the Room for a Gym, Clinic or Villa

A cryotherapy chamber in Riyadh in 6 decisions: electric or nitrogen cabin, room size, power to SBC 401, SABER import registration, air and service access.

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

TopicCryotherapy Chamber in Riyadh
Reading7 minutes
Sections9
Published16 November 2026
Updated

Sauna Dekor Spa Solutions engineering team, Istanbul · project and press enquiries: Alican Aykaç, Managing Partner

Updated: 16 November 2026

Short answer: a cryotherapy chamber in Riyadh is planned in 6 decisions: cabin type, room, power, import registration, air and service access. An electric single-person cabin such as the CryoOne needs about 1.2 m² plus space for its cooling aggregate. Sauna Dekor Spa Solutions plans and installs these rooms in Saudi Arabia, coordinated from our Dubai office.

This guide is for gym owners, clinic operators, hotel spa teams and villa owners in Riyadh, Jeddah and the rest of the Kingdom. It covers the room around the cabin, not what a session does to the body: we make no health claims, and the cabin manufacturer's own instructions govern use. For the wider range of rooms we build in the Kingdom, see our Riyadh page.

White CryoOne cryotherapy cabin with a glazed door, a touch control panel and its refrigeration aggregate housing on the left-hand side
The CryoOne electric cabin in white, with its aggregate housing beside the cabin: the room is drawn around both. Manufacturer's product image.

Electric or nitrogen: which cabin type suits a Riyadh site?

For most sites in Riyadh we start with an electric cabin, because it needs no nitrogen tank, gas line or tank room. The CryoOne in our IMMO range is electric and nitrogen-free, reaches down to −85 °C on the manufacturer's data, takes 1 person and runs 2–3 minute sessions. Nitrogen units are a different building project.

A nitrogen cabin needs a supply plan for the liquid gas, a storage position, and oxygen monitoring in the room, because nitrogen displaces the oxygen people breathe. That is a safety design question, set with the manufacturer, before the room is drawn. Our cryotherapy equipment page lists 8 models, electric and nitrogen, with their published data.

Electric or nitrogen: which cabin type suits a Riyadh site?
QuestionElectric cabinNitrogen cabin
Gas supplynoneliquid nitrogen deliveries and storage
Room safetyheat from the aggregate is ventilatedoxygen monitoring and extract, set by the maker
Spacecabin plus aggregatecabin plus tank position
Running itemselectricity, service visitsgas deliveries, electricity, service visits

How big is the room for a cryotherapy chamber in Riyadh?

Big enough for the cabin, its aggregate, a clear path to the door and a changing point. The CryoOne footprint is about 1.2 m² plus the aggregate, according to the CryoOne data sheet. Larger multi-person chambers need far more, so the model is chosen first and the room is drawn around it, not the other way round.

We also check 3 practical points on the survey: the floor must carry the cabin's weight, the door and corridor must let the cabin in, and a service technician must be able to reach the aggregate without moving the cabin. In a gym, the room usually sits next to the sauna and plunge zone, with its own door.

What power does a cryo cabin need in Saudi Arabia?

A dedicated circuit sized by a licensed electrician from the manufacturer's data sheet, with the protection the maker specifies and an isolator within reach of the service technician. Electrical work follows SBC 401, the electrical part of the Saudi Building Code 2024. We send the load data in the first week so the board capacity is checked early.

In an existing building the board is often the limit, not the room. If a gym is adding a cryo cabin next to a sauna that already draws a large load, the electrician confirms that both can run at the same time before the order is placed.

Service side of a CryoOne aggregate housing with two pairs of access doors, a touch control panel and a red push button
The service side of the CryoOne aggregate housing. The technician needs clear access to these doors, so the circuit and isolator are placed with them in mind. Manufacturer's product image.

How is an imported cryo cabin registered in the Kingdom?

Imported electrical equipment is registered on SASO's SABER platform before it clears customs, and a cryo cabin is 1 more item on that list. On our Saudi projects we prepare that registration as part of the delivery package, using the manufacturer's documents, while the cabin is in production, so paperwork does not hold the delivery date.

The certificates for the cabin belong to its manufacturer, not to us. What we deliver is the room preparation, the delivery, placing, connection and commissioning, and the handover to the operator's team.

How is the air handled around the cabin in Riyadh's climate?

The aggregate gives off heat while it runs, so the room needs 1 extract route, and the building's air-conditioning must cope with that extra load in a city where summer days are very hot. Riyadh's air is dry, which keeps condensation on the cabin and floor low. In Jeddah, on the humid Red Sea coast, we plan for more dehumidification.

For a nitrogen cabin the extract and oxygen monitoring are set by the maker and are not optional. For an electric cabin, ventilating the space for the unit's heat is enough, according to the manufacturer. In both cases the cabin room is kept separate from wet rooms such as steam rooms, so moist air does not reach the refrigeration unit.

White CryoOne cryotherapy cabin seen from the front, with the aggregate housing on the right-hand side and a touch control panel between them
The CryoOne shown with the aggregate housing on the right-hand side. The heat this housing gives off is what the room's extract removes. Manufacturer's product image.

Where does a cryo room fit in a gym, clinic or villa?

Next to the other cold and heat rooms, on 1 corridor, so users and staff move between them without crossing changing rooms. A typical sequence in a Riyadh club is sauna, cold plunge, cryo cabin and rest area. We build cold plunge pools for water temperatures from 2 to 15 °C, and the plunge and cryo cabin each keep their own plant.

Our guide to contrast therapy shows how hot and cold rooms are laid out as a circuit, and the cold plunge pool planning guide covers the plunge itself, including summer water temperatures in Riyadh and Jeddah.

White CryoOne cryotherapy cabin with the aggregate housing set behind the cabin, leaving a narrower front with the glazed door
The CryoOne with the aggregate housing behind the cabin, which keeps the front narrow. Which layout fits is decided on the room plan. Manufacturer's product image.

In what order is a cryotherapy room delivered?

In 6 steps, starting with the model and ending with handover to the operator. The cabin is produced while the room is prepared, so the site is ready when it arrives.

  1. Model choice: electric or nitrogen, single or multi-person, from the published data.
  2. Survey: floor, access route, board capacity and extract route.
  3. Drawing: cabin, aggregate, service clearance, door and changing point.
  4. Site preparation: circuit, isolator, extract and finished floor.
  5. Delivery, SABER registration, placing and connection.
  6. Commissioning and handover with the operator's team, following the maker's manual.

Our room-level checklist is on the cryotherapy room page, and the general background is in our article on cryotherapy.

Sauna Dekor Spa Solutions is a sauna, steam room, hammam and pool manufacturer since 1987: 40 years of manufacturing in Istanbul, a team of 19, TS EN ISO 9001:2015, and 5,000+ projects in 41+ countries, including 577+ hotel and resort projects, with 732 documented references in 32 countries and territories. Every project carries 24 months on workmanship and manufacturing, 24 months manufacturer's warranty on electrical and mechanical equipment, and 5 years on structure and waterproofing. We keep spare parts in stock in Istanbul for the equipment we install. Equipment is made by its manufacturers, whose certification belongs to them. Projects in Saudi Arabia are coordinated from our Dubai office (Latifa Tower, World Trade Centre).

Frequently asked questions about a cryotherapy chamber in Riyadh

Does an electric cryo cabin need a nitrogen supply?


No. An electric cabin such as the CryoOne cools with its own refrigeration aggregate, so there is no nitrogen tank, gas line or tank room. The room needs a dedicated circuit, extract for the aggregate's heat and service access.

How much space does a cryotherapy chamber need?


It depends on the model. The CryoOne needs about 1.2 m² plus its aggregate, on the manufacturer's data. Multi-person chambers need much more, so we choose the model first and then draw the room, door and service clearance around it.

Can a cryo cabin go in a villa in Riyadh?


Often yes, if the floor, the access route and the villa's electrical board allow it. We check all 3 on the survey, and we place the cabin away from steam rooms so moist air does not reach the refrigeration unit.

Do you deliver cryotherapy rooms in Jeddah and Dammam?


Yes. Projects in Riyadh, Jeddah, Al Khobar and Dammam are coordinated from our Dubai office. In Jeddah's humid coastal air we plan more dehumidification around the cabin than we do in dry Riyadh.

Who registers the cabin for import into Saudi Arabia?


On our projects we prepare the SABER registration on SASO's platform as part of the delivery package, using the manufacturer's documents. The certificates belong to the manufacturer; we handle placing, connection and commissioning.

What warranty does a cryo cabin carry?


IMMO equipment carries a 2-year warranty. The refrigeration unit is serviced according to the manufacturer's manual, and contact surfaces are wiped between sessions. We keep spare parts in stock in Istanbul for the equipment we install.

Our work

From our spa projects

Alican Aykaç, Managing Partner, Sauna Dekor
[ Author ]

Alican Aykaç · Managing Partner, Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions has designed, manufactured and installed saunas, steam rooms, hammams and pools since 1987, in its own facility in İkitelli OSB, Istanbul: 5,000+ projects in 41+ countries, including 577+ hotel and resort projects.

About Alican Aykaç

[ Related applications ]

Planning a room like this?

Send us the drawing or the room size. We will work out the heater, ventilation and finishes the room needs.

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote