[ Hyperbaric ]
Short answer: A hyperbaric chamber is a sealed pressure vessel in which guests breathe concentrated oxygen while the cabin is held above ambient pressure. Sauna Dekor Spa Solutions supplies, installs and commissions 4 hard-shell chamber types, from 1 to 6 seats and up to 1.5 bar, for hotels, clinics, villas and longevity centres across the GCC.
Sauna Dekor — spa and wellness rooms designed and built from Istanbul for 40 years, since 1987, by 19 people at İkitelli OSB; 5,000+ projects in 41+ countries. Hyperbaric chambers come from their manufacturer; we supply, install and commission them.
Chamber types
4 hard-shell types on one shared platform: the same compressor, cooler, concentrator and control software, in 4 different shells. The choice comes down to how many guests share a session and how much room the site has.
01 · Omega hard-shell chamber · 1 to 4 seats
A rounded, omega-section pressure vessel with wrap-around acrylic glazing and a round end door. Up to 4 guests sit in electrically adjustable reclining seats; the shape is meant to be seen, so it suits a spa or a villa suite where the chamber is the centre of the room.
02 · Walk-in multi-place chamber · 2 to 6 seats
A rectangular cabin you walk into through one sealed door, with quilted walls, recessed lighting and individual reclining seats, each with its own screen arm. It is the type for clinics and longevity centres that run group sessions back to back through the day.
03 · Compact seated chamber · 1 seat
An upright single-seat shell with a curved glass front and a perforated leather seat. It carries the same pressure range as the larger types in the smallest footprint, so it fits a treatment room, a small studio or a corner of a villa where a horizontal chamber would not.
04 · Lie-flat chamber · 1 person
A horizontal cylinder in which the guest lies fully flat on a quilted mattress, with a wide acrylic viewport along the side. It rolls on casters, runs from a standard socket and passes through residential doorways, so it can move between rooms without new building work.
Specifications
The 4 types share one oxygen supply of 93 % (±3 %) from a concentrator and differ in shell, seating and plant. Pressures are the working pressures stated by the manufacturer, up to 1.0 bar for the lie-flat type and up to 1.5 bar for the others; the final configuration is fixed in the site layout.
| Type | Coral Ark · omega | Coral Cube · walk-in | Coral Pod · compact seated | Coral One · lie-flat |
|---|---|---|---|---|
| Shell | Rigid omega-section vessel, acrylic arches | Rigid rectangular cabin, one sealed door | Rigid upright shell, curved glass front | Rigid horizontal cylinder, side viewport |
| Working pressure | Up to 1.5 bar | 0.5–1.5 bar | 0.5–1.5 bar | Up to 1.0 bar |
| Occupants | 1–4 | 2–6 | 1 | 1 |
| Posture | Reclining seats, electrically adjusted | Reclining seats with screen arms | Upright seat | Fully flat, 180° |
| Oxygen supply | Concentrator, 93 % (±3 %) | Concentrator, 93 % (±3 %) | Concentrator, 93 % (±3 %) | Concentrator, 93 % (±3 %) |
| Plant | Compressor + air cooler + concentrator in a technical room | Same 3 units, sized for back-to-back sessions | Same 3 units, compact layout | Same 3 units, compact layout |
| Power | Supply sized in the site layout | Supply sized in the site layout | Standard mains socket | Standard mains socket |
| Session length | Set by the operator | Set by the operator | 45 minutes (manufacturer figure) | Set by the operator |
| Typical site | Hotel spa, villa wellness suite, longevity centre | Clinic, longevity centre, group sessions | Treatment room, small studio, villa | Villa, studio, treatment room |
Source: manufacturer's model specifications, October 2026.
Shared platform
Each chamber arrives with 3 plant units, 2 control positions and one control program; only the shell around them changes. The operator runs the session from outside, the guest has a second set of controls inside, and the software logs every reading so the session record can be exported after each use.
Oxygen reaches each guest through a mask or hood on the built-in breathing system, which also watches carbon dioxide; outside, the operator follows pressure, oxygen and temperature live.
Room requirements
8 points we settle on the drawings before an order is placed. Most delays on a hyperbaric project come from the room, not the chamber: a slab that needs checking, a lift that is too small or a technical room that was never drawn. Settling them first keeps the delivery date fixed.
A hard-shell chamber is a steel and acrylic pressure vessel, so it is heavy for its size. We take the weight and footprint from the manufacturer's sheet for the chosen model and have the slab checked by the structural engineer before the room is fixed, especially on upper floors of hotels and villas.
The chamber has to reach the room. We measure doors, corridors, lift cars and turning points against the delivery dimensions; the lie-flat chamber passes residential doorways, while the omega and walk-in types are planned for on-site assembly by our team.
The compressor, air cooler and concentrator sit outside the guest room. For each site the manufacturer draws the plant arrangement while the project is planned; we build that room with service clearance, acoustic lining and a short, protected route for the air and oxygen lines.
The compact and lie-flat chambers run from a standard mains socket. The larger types need a dedicated supply sized in the site layout. Power, earthing and the emergency stop circuit are installed by a licensed electrician to the local code.
Compression, the cooler and the concentrator all release heat. In the Gulf we size the room's air conditioning for that load and give the concentrator a fresh, filtered air intake, because it draws its oxygen from the room air.
An oxygen-enriched space is treated as a fire risk. The room gets non-combustible finishes, smoke detection and a clear rule set: no open flames, oils, aerosols or personal electronics in the cabin. We follow the hyperbaric chapter of NFPA 99 as the reference and the requirements of the local civil defence authority.
Every session is watched from outside: the operator console, the in-cabin camera feed and the intercom. We plan a fixed operator position with a clear view of the chamber and a network point for the control tablet.
Wellness use and medical use are licensed differently. Before ordering, the operator confirms which licence applies with the local health authority and the free-zone or municipality; we prepare the drawings and the equipment file they ask for.
Process
6 steps from the first survey to the maintenance plan. The same team surveys the site, builds the guest room and the technical room, assembles the chamber and trains the operators, so one contractor answers for the room and the installation from the first drawing to handover.
We visit the site or work from drawings, agree the number of guests per session and the daily use, and choose the chamber type that fits the room, the access route and the plant space.
We draw the guest room and the technical room together: structure, power, air conditioning, the concentrator's air intake, finishes, lighting and the operator position.
The operator files the licence application with our drawings and the manufacturer's equipment file; the chamber is ordered once the room is approved.
The chamber is delivered and assembled on site by our team, then connected to its compressor, cooler and concentrator in the technical room.
We run the pressure, oxygen and alarm checks, test the emergency stop and the oxygen-to-air switchover, and train the operators on the console and the daily checklist.
Daily checks follow the operator checklist; seals, valves and the pressure system are inspected on the manufacturer's schedule, with the manufacturer's manuals and remote support behind our service visits.
Safety
The same 6 safety systems ship with every type, whether the chamber goes into a clinic or a home. They act on their own when a reading leaves its range, and they are tested one by one at commissioning before the first guest session is run.
The manufacturer designs and certifies the pressure vessel to the EU Pressure Equipment Directive 2014/68/EU and to ASME PVHO-1 (pressure vessels for human occupancy), works under ISO 13485 quality management and applies CE marking. These are certificates held by the manufacturer. Copies are not published online; we request them from the manufacturer and include them, with the certifying bodies and certificate numbers, in the documents that come with our quotation.
We supply these chambers as wellness equipment, not as medical devices, and this page makes no treatment claims. Hyperbaric oxygen used as a medical treatment is the practice of medicine: it needs a licensed physician, a licensed facility and approval from the local health authority.
Gallery
8 frames from the chamber range: the omega cabin through its end door, the walk-in cabin's seat rows and entry, the lie-flat interior and shell, the leather seat of the compact chamber, and an omega chamber in a darkened treatment room.
Where it fits
3 typical settings: a hotel spa, a longevity centre or clinic, and a private villa. In each one the chamber sits at the quiet end of the programme, with its technical room behind a service wall and a fixed position for the operator.
An omega or compact chamber placed at the quiet end of the thermal circuit, after the sauna and the cold rooms, with the technical room behind the spa's plant wall.
A walk-in chamber for group sessions, planned next to the cryotherapy room and the red light therapy room; see our longevity centre planning page for the full room programme.
A lie-flat or compact chamber in the wellness suite, often beside a float tank room; the omega type suits villas with space for a separate technical room.
Sauna Dekor Spa Solutions has delivered 5,000+ projects in 41+ countries since 1987, including 577+ hotel and resort projects, with regular installation work in the UAE, Saudi Arabia and Qatar and across the wider GCC. For the Dubai room fit-out, permits and the cost drivers, read our guide to hyperbaric chamber rooms in Dubai; for the background on the other recovery rooms, see the cryotherapy and red light therapy guides.
FAQ
A hyperbaric chamber is a sealed pressure vessel. While the cabin is held above ambient pressure, the guest breathes oxygen from a concentrator through the chamber's breathing system. The 4 hard-shell types we supply work at up to 1.5 bar; the lie-flat type works at up to 1.0 bar.
No. The Coral Ark, Cube, Pod and One are made and certified by their manufacturer. Sauna Dekor Spa Solutions supplies them, prepares the room and the technical room, assembles the chamber on site, commissions it and trains the operators.
A soft-shell chamber is an inflatable fabric body and works at low pressure. A hard-shell chamber is a rigid vessel built and certified as pressure equipment, with a wider pressure range, fixed seating and integrated controls. All 4 types on this page are hard-shell.
It depends on the type. The compact and lie-flat chambers run from a standard mains socket and need little more than their footprint and service clearance. The omega and walk-in chambers need a separate technical room for the compressor, air cooler and concentrator, sized in the manufacturer's site layout.
Yes. The lie-flat chamber rolls on casters and passes residential doorways, and the compact chamber fits a small room. An omega chamber works in a villa wellness suite when there is space for its technical room. Floor load, access and approvals are checked first.
A trained operator outside the chamber runs every session from the control tablet, with the camera feed and the intercom. We train the operators at handover. Medical use of hyperbaric oxygen needs a licensed physician and local approval.
The operator sets the session in the control software. For the Coral Pod compact seated chamber the manufacturer describes a 45-minute session; for the other types the length follows the operator's own programme.
The chamber equipment carries a 2-year warranty and our installation workmanship 24 months. Daily checks follow the operator checklist; seals, valves and the pressure system are inspected on the manufacturer's schedule.
Send us the room size, the floor and the number of guests per session; we will propose the chamber type, the room scope and the budget range.
Last updated:
Book a consultation or speak with our team.
We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL
Sauna Dekor Spa Solutions
Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.
Your cookie choice
We use analytics and advertising cookies only with your consent, to measure how the site is used and to measure our ads. Cookies policy