Coral CubeIMMO
Hyperbaric & IHHT · IMMO Longevity
Walk-in rectangular hyperbaric cabin for 2–6 guests; 0.5–1.5 bar, 93 % oxygen concentrator, CE PED and ASME.
- Pressure
- 0.5–1.5 bar
- Oxygen
- 93% (±3), on-site concentrator — no cylinders
- Capacity
- 2–6 guests, multi-person seating
- Form
- Walk-in rectangular cabin, sealed side door
- Interior
- Quilted leather walls — cream or dark green
- Climate
- Individual climate control under pressure
IMMO Longevity · Hyperbaric & IHHT
Sauna Dekor has manufactured saunas, Turkish hammams, steam rooms, salt rooms and pools at its own facility in İkitelli OSB, Istanbul, since 1987: 5,000+ projects in 41+ countries.
Technical specifications
Coral Cube specifications
The values are taken from the manufacturer's published product information.
- Pressure
- 0.5–1.5 bar
- Oxygen
- 93% (±3), on-site concentrator — no cylinders
- Capacity
- 2–6 guests, multi-person seating
- Form
- Walk-in rectangular cabin, sealed side door
- Interior
- Quilted leather walls — cream or dark green
- Climate
- Individual climate control under pressure
- Control
- Coral Control tablet, 10 samples per second
- Certificate
- CE 2014/68/EU PED · ASME · ISO
- Entry
- Single sealed door
- Seats
- Individual reclining seats, each with a personal tablet arm and headphone socket
- Acoustics
- Quilted walls damp outside noise almost to silence
- Technical room
- 1 × air compressor (redundant pressure) · 1 × air cooler · 1 × oxygen concentrator — scaled to the multi-guest volume
- Use profile
- Clinics, longevity centres and studios, with sessions back to back through the day
- Safety
- Automatic locks, emergency stop, pressure monitoring
- Pressure-vessel certificate
- CE / 2014/68/EU PED; production chain compliant with ASME and ISO
- Certificates (product family)
- Manufacturer's certificates: PED 2014/68/EU · ASME PVHO-1 · ISO 13485 · CE marking
- Made in
- Istanbul, Türkiye
Key features
What the Coral Cube offers
2–6 guests
A walk-in rectangular cabin with a sealed side door and multi-person seating.
0.5–1.5 bar, 93 % oxygen
Oxygen comes from an on-site concentrator, with no cylinders.
Climate and interior
Individual climate control under pressure; quilted leather walls in cream or dark green.
Control and certificates
Coral Control tablet at 10 samples per second. CE 2014/68/EU PED, ASME and ISO, as listed by the manufacturer.
Installation and use
Why this equipment
Site requirements
A floor-load check, service clearances and a plant room sized for continuous daily use.
Where it is used
Clinics, hotel spas and wellness centres that run group sessions.
Maintenance and warranty
Periodic inspections follow the pressure-vessel documentation and the manufacturer's manual. IMMO equipment carries a 2-year warranty; Sauna Dekor delivers, places, connects and commissions it.
Installation notes
Installing the Coral Cube
A walk-in cabin
The Cube is rectangular and walk-in: guests enter without bending. This is where it makes a difference for guests with limited mobility and in group sessions — with capsule-type cabins, getting in and out is an obstacle in itself.
Groups of up to six
It runs with two to six guests in individual reclining seats. In a commercial facility, the number of guests per session sets how many people the room can serve in a day; this is the highest-capacity model in the range.
Technical room
Every installation needs a separate technical room outside the cabin. It holds the air compressor, air cooler and oxygen concentrator; together they keep the cabin at a constant pressure and temperature throughout the session. The concentrator separates oxygen from the air, so there are no cylinders and no refill cycle — the point operators ask about most. We fix the position and ventilation of the technical room with you at the site survey; finding space for it later is the most expensive item in an installation.
Oxygen and pressure
The Cube works between 0.5 and 1.5 bar, in fine steps. The flow supplied to the cabin is 93 % (±3 %) pure. The operator sets the session protocol; the unit stays within that range.
Safety
Safety systems
As specified by the manufacturer for the whole range.
Automatic oxygen-to-air switch-over
The in-cabin monitoring switches automatically from oxygen to ambient air as soon as it detects a value outside the set range.
Emergency release inside and out
Each cabin opens from both sides: the guest can release the door from inside, and the operator can do the same from outside without a key sequence.
Live oxygen concentration sensor
Oxygen purity is monitored in real time throughout the session; every data point is logged for the operator on the Coral Control tablet.
Continuous camera monitoring
The in-cabin camera feed goes to the operator's tablet, so visual contact is kept from start to finish, alongside a two-way intercom.
Closed-loop regulator system
Gas paths are fully sealed and isolated. The regulator takes in clean air and releases used air; the two do not mix, which keeps the risk of cabin contamination low.
CE-certified pressure vessel
Each cabin is designed and certified to the 2014/68/EU Pressure Equipment Directive; the production chain follows ASME and ISO requirements.
Certification
Certificates
- PED 2014/68/EU — EU Pressure Equipment Directive
- ASME PVHO-1 — pressure vessels for human occupancy
- ISO 13485 — the manufacturer's quality management
- CE marking applied by the manufacturer
The certificates are the manufacturer's and apply to the product range as published.
Gallery
Coral Cube images
Frequently asked
Common questions
What are the main specifications of the Coral Cube?
Pressure: 0.5–1.5 bar; Oxygen: 93% (±3), on-site concentrator — no cylinders; Capacity: 2–6 guests, multi-person seating; Form: Walk-in rectangular cabin, sealed side door; Interior: Quilted leather walls — cream or dark green; Climate: Individual climate control under pressure; Control: Coral Control tablet, 10 samples per second; Certificate: CE 2014/68/EU PED · ASME · ISO. Values are from the manufacturer's published product information.
What does installing the Coral Cube require?
Chambers need a floor-load check, a place for the oxygen concentrator and installation to the pressure-vessel documentation.
Who delivers and installs the Coral Cube?
Sauna Dekor delivers, places, connects and commissions the Coral Cube as part of the rooms it designs and builds. The product and its certificates are the manufacturer's.
Where is the Coral Cube used?
Clinics, hotel spas and wellness centres that run group sessions.
What maintenance does the Coral Cube need, and what is the warranty?
Periodic inspections follow the pressure-vessel documentation and the manufacturer's manual. IMMO equipment carries a 2-year warranty; Sauna Dekor delivers, places, connects and commissions it.
Same category
Other hyperbaric & IHHT models
Coral Ark
Omega-shaped walk-in hyperbaric room for several guests; 0.5–1.5 bar, pressure-vessel certified.
0.5–1.5 bar · 60–90 min
Coral One
Single-guest hyperbaric chamber in a fully reclined position; 0–1.0 bar, pressure-vessel certified.
0–1.0 bar · Fully reclined
Coral Pod
Compact single-guest hyperbaric chamber for small-room footprints; 0.5–1.5 bar, pressure-vessel certified.
0.5–1.5 bar · 60–90 minRooms we build with this equipment: Hyperbaric suites · All hyperbaric & IHHT models
Is the Coral Cube right for your project?
Send the room dimensions, the number of users and the available electrical supply; we will check the fit with you.
Updated: