+971 58 558 1295 ENTR Request a Quote
Pale timber villa sauna with a two-tier L-shaped bench, a lit backrest and two shaded wall lamps

[ Blog ]

Home Sauna in Riyadh: Planning a Villa Sauna in Saudi Arabia

A home sauna in Riyadh in 7 decisions: size and users, where it goes in the villa, heater and glass, timber, power to SBC 401, air, and the order of works.

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

TopicHome Sauna in Riyadh
Reading7 minutes
Sections9
Published16 November 2026
Updated

Sauna Dekor Spa Solutions engineering team, Istanbul · project and press enquiries: Alican Aykaç, Managing Partner

Updated: 18 November 2026

Short answer: a home sauna in Riyadh is planned in 7 decisions, and the room runs at 80–100 °C (Hussain and Cohen, 2018), so heat, power and air are fixed before any timber is ordered. A single villa sauna takes 1.5–12 weeks from order to use, depending on its size. Sauna Dekor Spa Solutions delivered a sauna and hammam for a private villa in Riyadh in 2024.

This guide is for villa owners and their architects in Riyadh, Jeddah and the rest of the Kingdom. It follows the order in which a home sauna is actually decided, from who uses it to the day it is handed over. For the commercial side, hotel and club saunas and the codes we work to, see our Riyadh page.

How many people, and how big should it be?

Start with the number of people who sit at once, usually 2 to 4 in a family villa. Each person needs a length of upper bench to sit or lie on, and the ceiling is kept low so the heat stays at bench level. A sauna that is too tall or too large takes longer to heat and needs a bigger heater.

Decide early whether anyone will lie down. A lying bench sets the length of the room, and that one dimension often decides which room in the villa can take the sauna.

How many people, and how big should it be?
DecisionWhat it fixesWho needs it first
Users and sizebench length, ceiling height, heater sizeowner
Position in the villashower nearby, wall type, doorarchitect or interior designer
Heater and glassheater output, controlsowner, with us
Timberwall and bench boards, colour, smellowner, with us
Powercircuit, isolator, board capacityelectrician
Airfresh-air inlet, extract, AC around the roomMEP engineer
Order of worksdelivery, installation, first heat-upsite manager

Where should a home sauna in Riyadh go in the villa?

Close to a shower and a place to cool down, on an internal wall where possible, and away from bedrooms that share a wall. 3 positions work well in villas: next to the master bathroom, in a basement spa with a shower and a plunge, or beside the pool house. External walls in direct summer sun are avoided, because they add heat to a room that is already hot and load the villa's air-conditioning.

If a hammam or steam room is planned as well, the sauna and the wet room share a corridor, not a wall, so the steam does not reach the timber.

Which heater, and does glass change it?

An electric heater sized from the room volume, with the glass counted in. Harvia adds about 1.2 m³ of volume for every square metre of glass, stone or concrete, because those surfaces take up heat that timber does not. A full glass front can push a room into the next heater size. The method is set out in our guide to sauna heater sizing.

We have used EOS heaters for about 20 years, and Harvia heaters on a project basis. An electric Finnish sauna heats up in about 1 hour, following the maker's guidance, and the heater is never run without its stones.

Floor-standing electric sauna heater with dark stones in the corner of a fully panelled timber sauna, beside the bench
A floor-standing heater in the corner of the same villa sauna; the guard rail and clearances follow the heater maker's manual. Project photograph; private client, not named.

Which timber suits a villa sauna?

Usually 1 of 6: ayous, thermo-ayous, aspen, thermo-aspen, pine or thermo-pine. Ayous and aspen stay pale and cool to the touch on benches; thermo-treated timber is darker and more stable. Hemlock, red cedar and alder are built on request. The benches use timber with no knots and no resin, because they are what people touch at 80–100 °C.

Our timber is kiln-dried with a special process, certified and used at a specified moisture content. It is machined in Istanbul and shipped as a kit, so the boards arrive cut to the drawing rather than cut on site.

What power does a home sauna need in Saudi Arabia?

A dedicated circuit from the villa board, sized by a licensed electrician from the heater's datasheet, with residual-current protection and an isolator outside the sauna. The electrical work follows SBC 401, the electrical part of the Saudi Building Code 2024, and IEC 60364-7-703 for rooms containing sauna heaters. Many heaters above about 9 kW need a 3-phase supply. The details are in our guide to sauna electrical requirements.

Imported heaters and controls are registered on SASO's SABER platform before they clear customs. On our Riyadh projects we handle that registration as part of the package.

How is the air handled, inside and around the sauna?

With 2 openings: fresh air enters low, near the heater, and leaves high on the opposite side or under the bench, so the air changes during a session. Around the sauna, the villa's air-conditioning must not blow onto the sauna door or glass, and the room the sauna stands in needs extract, because the sauna gives off heat after every use. Our page on sauna ventilation shows the inlet and outlet positions.

Riyadh's air is very hot in summer but dry, which suits a sauna: the room dries quickly after use, and timber movement is smaller than on the humid Gulf coast.

Marble villa hammam with a central marble platform, marble side benches and a round cove-lit ceiling
The hammam built in the same Riyadh villa as the sauna above. Project photograph; private client, not named.

In what order is a home sauna installed?

In 6 steps; a single sauna takes 1.5–12 weeks from order to use, depending on its size. The timber kit is made in Istanbul in parallel with the site preparation, so the room is ready when the kit arrives.

  1. Survey: room size, walls, floor, board capacity and air routes.
  2. Drawing: bench layout, heater position, glass, door and controls.
  3. Site preparation: circuit, isolator, inlet and extract openings, hard washable floor.
  4. Frame, insulation and vapour barrier, then the timber walls and ceiling.
  5. Benches, heater, controls, lighting and door.
  6. First heat-up and handover with the owner: controls, cleaning and care.

Sauna Dekor Spa Solutions is a sauna, steam room, hammam and pool manufacturer since 1987: 40 years of manufacturing in Istanbul, a team of 19, TS EN ISO 9001:2015, and 5,000+ projects in 41+ countries, including 577+ hotel and resort projects, with 732 documented references in 32 countries and territories. Every project carries 24 months on workmanship and manufacturing, 24 months manufacturer's warranty on electrical and mechanical equipment, and 5 years on structure and waterproofing. We keep spare parts in stock in Istanbul for the equipment we install. Heaters and controls are made by their manufacturers, whose certification belongs to them. Our full range is on our products page.

Frequently asked questions about a home sauna in Riyadh

How hot does a home sauna get?


A Finnish sauna runs at 80–100 °C at low humidity. Most owners use it at the lower end of that range and add humidity by pouring water on the stones. The controller limits the temperature and switches the heater off after a set time.

How long does it take to install a sauna in a Riyadh villa?


A single sauna takes 1.5–12 weeks from order to use, depending on its size. The timber kit is made in Istanbul while the site is prepared, and import registration for the heater and controls is planned into the same programme.

Can a sauna go in an apartment in Riyadh?


Often yes, with the building's approval for the electrical load and the works. The room needs a dedicated circuit, a washable floor and a route for fresh air. We check the board capacity before confirming the heater size.

Do you install saunas in Jeddah and Dammam as well?


Yes. Projects in Riyadh, Jeddah, Al Khobar and Dammam are coordinated from our Dubai office at Latifa Tower, and our own teams travel to site for installation and the first heat-up with the owner.

Can a sauna and a hammam be built in the same villa?


Yes, and many villas in the Kingdom combine them. The sauna stays dry and the hammam wet, so they share a corridor rather than a wall, and each has its own air route and drain plan.

What maintenance does a home sauna need?


Little: wipe and air the benches after use, wash them now and then with water and a soft brush, check the stones once a year and replace broken ones, and keep the vents clear. Bench boards can be lightly sanded when they darken.

Our work

Sauna projects

Alican Aykaç, Managing Partner, Sauna Dekor
[ Author ]

Alican Aykaç · Managing Partner, Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions has designed, manufactured and installed saunas, steam rooms, hammams and pools since 1987, in its own facility in İkitelli OSB, Istanbul: 5,000+ projects in 41+ countries, including 577+ hotel and resort projects.

About Alican Aykaç

[ Related applications ]

Planning a room like this?

Send us the drawing or the room size. We will work out the heater, ventilation and finishes the room needs.

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote