+971 58 558 1295 ENTR Request a Quote
Mosaic-lined spa pool with a stainless steel handrail and a deck-level grating, in front of dark marble slats lit by a wave of vertical light lines, in a members' club spa in Doha

[ Blog ]

Swimming Pool Construction in Qatar: Villa and Hotel Pools in Doha

Swimming pool construction in Qatar in 7 decisions: pool type, approvals, summer heat, desalinated water, humidity, the plant room and the order of works.

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

TopicSwimming Pool Construction in Qatar
Reading8 minutes
Sections9
Published16 November 2026
Updated

Sauna Dekor Spa Solutions engineering team, Istanbul · project and press enquiries: Alican Aykaç, Managing Partner

Updated: 18 November 2026

Short answer: the length of swimming pool construction in Qatar depends on pool type, size and site, and the water is held at 26–28 °C, the comfort band behind World Aquatics' 25–28 °C rule for competition pools. In Doha that means planning for cooling, desalinated water and coastal humidity from day 1. Sauna Dekor Spa Solutions built the pool areas of the Diplomatic Club in Doha, delivered in 2022.

This guide is for villa owners, developers and hotel teams in Doha and the rest of Qatar who are about to brief a pool contractor. It covers what changes in Qatar. The general stages of a pool build, from survey to first fill, are on our page about swimming pool construction, and we do not repeat them here.

Which pool type suits a villa or hotel in Qatar?

Usually 1 of 3: a tiled reinforced-concrete pool, a stainless steel pool or a one-piece shell. Concrete takes any shape and any edge, which is why hotels and larger villas choose it. Stainless steel is built on a project basis for rooftops and tight programmes. A shell suits a smaller garden with a clear crane route from the road.

In Doha the choice is often made by the site, not by taste. Many villa plots are walled on all sides, towers have weight limits on podium slabs, and hotel pools sit on top of car parks. The structural engineer's load figure for the slab comes before any drawing of steps or edges.

Which pool type suits a villa or hotel in Qatar?
Pool typeSuits in QatarFirst check
Reinforced concrete, tiledhotels, larger villas, overflow edgessoil or slab report, waterproofing system
Stainless steelrooftops, podiums, short site timeslab load, lifting route
One-piece shellsmaller villa gardenscrane access over the boundary wall
Indoor poolvillas and hotels used year-roundpool hall air handling and vapour barrier
Square tiled whirlpool pool with jets running, set into dark marble coping inside a backlit slatted enclosure
A mosaic-lined spa pool at the Diplomatic Club, Doha, delivered in 2022, with stone coping and a slatted enclosure. Project photograph.

Who has to approve a pool in Qatar?

Usually 3 parties: the authority that issues the building permit for the plot, the utility that supplies water and power, and, in towers and compounds, the building or community management. In Qatar the water and electricity utility is Kahramaa. Each one wants drawings before work starts, so the approval sequence is planned into the programme, not added at the end.

We prepare the pool drawings, the plant schedule and the electrical loads that these submissions need, and our client's consultant or main contractor files them. Rules change, so the current list of documents is always confirmed with the authority for the specific plot before the first submission.

How does Qatar's summer heat change a pool?

It turns the heater into a chiller for much of the year. Outdoor pool water in Doha's summer can rise well above the 26–28 °C comfort band, so many villa and hotel pools need a heat pump that can cool as well as heat. The unit is sized from the water volume, the surface area and the shade.

Shade is the cheapest cooling. A pergola, a covered terrace or a pool set in the shadow of the villa reduces the load more than any change of equipment. An automatic or thermal cover helps both ways: it cuts evaporation and heat gain by day and keeps heat in during winter evenings. Our outdoor swimming pool page shows the equipment we specify.

What does Qatar's water mean for the plant room?

Most of Qatar's mains water is produced by desalination, so it starts soft and low in minerals. That changes 2 things: the water balance must be watched so it does not attack grout, metal and plaster, and the chemical dosing is set for that water rather than for hard water. A test of the actual fill water comes first.

Where a villa relies on tanker water or a storage tank, the source can vary from one fill to the next, which is another reason to test before dosing. Filtration, dosing and the balance tank are drawn together in one plant room; our page on the spa plant room sets out the space and access it needs.

Why does humidity matter so much for indoor pools in Doha?

Because Doha is a coastal city, and for much of the year the outside air is hot and humid at the same time. An indoor pool hall adds its own evaporation on top, so the air handling unit has to remove a large latent load. If it does not, water condenses on cold glass, steel and ceilings within 1 season.

Three things are fixed in the drawings: a continuous vapour barrier on the warm side of the walls and roof, an air handling unit sized for dehumidification rather than for cooling alone, and supply air washed over the glazing. Indoor pools in Doha are covered in detail on our indoor swimming pool page.

Sunken whirlpool pool lined in green glass mosaic with marble coping and a floor return grille, with vapour rising in front of backlit slatted walls
Warm water at the Diplomatic Club, Doha, delivered in 2022: the vapour above the surface is the latent load the air handling has to remove. Project photograph.

Skimmer or overflow edge for a pool in Qatar?

Either works, and the choice is made in the shell drawings, not on site. A skimmer pool is simpler and needs no balance tank. An overflow edge needs 3 extra parts: a channel, a balance tank sized for the displaced water and an edge that is level along its whole length. Hotels often choose overflow for cleaner surface water.

In a dusty climate the surface collects fine sand every day, so the skimmer count or the overflow channel length is not reduced to save cost. Our page on pool overflow types compares the options.

Indoor spa pool hall with two mosaic-lined pools, white overflow gratings along the edges, stainless steel ladders and dark marble walls with a wave of vertical light lines
The pool hall at the Diplomatic Club, Doha, delivered in 2022: overflow gratings run along the pool edges. Project photograph.

In what order does swimming pool construction in Qatar run?

In 6 steps; the build time depends on pool type, size and site. The plant room and the electrical supply are prepared while the concrete sets, so the pool can be tested as soon as the finish is complete.

  1. Survey: plot or slab, access route, soil or structural report, water source.
  2. Drawings: shell, edge, plant room, electrical loads and approval set.
  3. Approvals with the permit authority, the utility and any building management.
  4. Shell, waterproofing and a water-tightness test before tiling.
  5. Finishes, plant installation, cooling and heating unit, covers.
  6. First fill, water balance, commissioning and handover to the owner or operator.

Projects in Qatar are coordinated from our Dubai office (Latifa Tower, World Trade Centre), and we are represented by our representative office in Doha. Our own teams travel to site for the shell checks, the finishes and commissioning. The wider range of rooms we build in Qatar is on our Doha page, and the club project is described in the Diplomatic Club case study.

Sauna Dekor Spa Solutions is a sauna, steam room, hammam and pool manufacturer since 1987: 40 years of manufacturing in Istanbul, a team of 19, TS EN ISO 9001:2015, and 5,000+ projects in 41+ countries, including 577+ hotel and resort projects, with 732 documented references in 32 countries and territories. Every project carries 24 months on workmanship and manufacturing, 24 months manufacturer's warranty on electrical and mechanical equipment, and 5 years on structure and waterproofing. We keep spare parts in stock in Istanbul for the equipment we install. Equipment is made by its manufacturers, whose certification belongs to them. We also build stainless steel swimming pools on a project basis.

Frequently asked questions about swimming pool construction in Qatar

How long does it take to build a swimming pool in Qatar?


It depends on pool type, size and site. A one-piece shell in a villa garden is quicker to build than a tiled concrete hotel pool with an overflow edge and an indoor hall. Approvals are planned into the same programme.

What water temperature should a pool in Doha run at?


Most villa and hotel pools are held at 26–28 °C, the comfort band behind the 25–28 °C that World Aquatics sets for competition pools. In summer that usually means cooling the water, so the heat pump is chosen to work in both directions.

Do you build indoor pools in Doha?


Yes. An indoor pool needs the pool, the hall air and the building envelope drawn together: dehumidification, a continuous vapour barrier and air washed over the glazing. Without them, condensation appears on glass and ceilings within the first humid season.

Can a pool be built on a podium or a roof in Qatar?


Often yes, once the structural engineer confirms the slab can carry the water and the finishes. Stainless steel pools are built on a project basis for these sites because they are precise, light compared with thick concrete, and quick to install.

Who supplies the water and power for a new pool?


Kahramaa is Qatar's water and electricity utility, and the pool's electrical load and water connection are part of the submission for the plot. The fill water is tested before dosing, because desalinated and tanker water behave differently in a pool.

Do you work outside Doha, for example in Al Wakrah or Al Khor?


Yes. Projects anywhere in Qatar are coordinated from our Dubai office, with our representative office in Doha, and our teams travel to site for the critical stages, from the shell test to commissioning and handover.

Sources

Our work

Pool projects

Alican Aykaç, Managing Partner, Sauna Dekor
[ Author ]

Alican Aykaç · Managing Partner, Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions has designed, manufactured and installed saunas, steam rooms, hammams and pools since 1987, in its own facility in İkitelli OSB, Istanbul: 5,000+ projects in 41+ countries, including 577+ hotel and resort projects.

About Alican Aykaç

[ Related applications ]

Planning a room like this?

Send us the drawing or the room size. We will work out the heater, ventilation and finishes the room needs.

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote