+971 58 558 1295 ENTR Request a Quote
Kapalı havuz salonu: koyu mozaik kaplı havuz, paslanmaz merdiven tutamağı, ahşap kafes duvar paneli, tavana yakın havalandırma menfezleri ve gri şezlonglar

[ Blog ]

Pool Tiles: Choosing Glass Mosaic, Porcelain or Stone and Fixing Them to Last

Pool tiles in 6 decisions: glass mosaic, porcelain or stone, adhesive and grout, steps and waterline, Gulf sun and water, and the order a pool is tiled in.

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

TopicPool Tiles
Reading6 minutes
Sections8
Published21 November 2026
Updated

Sauna Dekor Spa Solutions engineering team, Istanbul · project and press enquiries: Alican Aykaç, Managing Partner

Updated: 21 November 2026

Short answer: pool tiles are chosen in 3 families: glass mosaic, porcelain and natural stone. Each one only lasts if it sits on a fully hardened, waterproofed shell with a pool-rated adhesive and grout. Sauna Dekor Spa Solutions builds and tiles hotel, residence and villa pools and plans them from Istanbul and our Dubai office.

This guide is for owners, architects and hotel teams choosing the lining of a new pool or a re-tiled one. It covers the material, the fixing system, the details that fail first and the order of work. For the full build, see our page on swimming pool construction.

Curved mosaic pool with lit water in front of a dark figured marble feature wall
A curved pool lined in small-format mosaic at the Oran Hotel in Istanbul, delivered in 2019. Mosaic follows a curve without cut tiles at the bends. Project photograph.

Which tiles can line a swimming pool?

3 families are used under water: glass mosaic, porcelain tiles and natural stone. All 3 must be rated for permanent immersion and for treated pool water. Glass mosaic suits curves and steps, porcelain suits long straight walls and floors, and stone is used mostly at the edge and on the deck rather than in the basin.

Ceramic wall tiles made for bathrooms are not a substitute. Their glaze and body are not designed to stay under water all year, and their joints are wider than pool systems allow. The tile maker's data sheet should state that the product is suitable for swimming pools; if it does not, we do not specify it.

Glass mosaic, porcelain or stone: how do they compare?

Compare them on 4 points: shape, joints, colour and repair. Mosaic has the most joints and follows any curve; porcelain has fewer joints and a calmer surface; stone gives the warmest look but needs sealing and more care with pool chemistry. Many pools use 2 of them together.

Glass mosaic, porcelain or stone: how do they compare?
QuestionGlass mosaicPorcelainNatural stone
Shapecurves, steps, round poolsstraight walls and floorsedges, decks, feature walls
Jointsmany narrow jointsfewer jointsdepends on the format
Colour under waterbright, reflectiveeven, matt or satinnatural variation
Repairsheets matched from the same batchsingle tiles replacedmatching the stone can be hard

Colour also decides how the water looks. Dark linings make the water read deep and calm, as in the hotel pool on our Hilton Istanbul Maslak project page; pale linings make it read bright and shallow.

What adhesive and grout does a tiled pool need?

A cementitious adhesive of class C2 to EN 12004 or a reaction-resin adhesive, and a grout of class CG2 to EN 13888 or an epoxy (RG) grout, all approved by their makers for immersion. Under them sits 1 continuous waterproofing layer over a hardened concrete shell. The tiles are the finish, not the seal.

Epoxy grout is the usual choice where pool chemistry is aggressive or the pool is used heavily, because it does not wash out of the joints. Movement joints are planned in the shell and carried through the tiles, so the lining can follow thermal movement without cracking. Our structure and waterproofing work carries a 5-year warranty on every project.

Sunken whirlpool pool lined in green glass mosaic with marble coping, a floor return grille and backlit slatted timber walls
A sunken whirlpool at the Diplomatic Club in Doha, delivered in 2022: green glass mosaic in the basin and marble coping at the edge. Project photograph.

How are steps, edges and the waterline tiled?

These 3 zones fail first, so they get their own details. Step nosings are marked in a contrasting colour so swimmers can see them. The waterline band takes sun, oils and scale, so it is often a different tile or a glass band that is easy to clean. The edge meets the coping or the overflow grille.

Floors and steps need a slip-resistant surface where people walk, while vertical walls under water can stay smooth. In an overflow pool the tiles run over the edge into the channel, so the layout is drawn in section before tiling starts; our guide to pool overflow types shows the 4 edge details.

GCC / UAE climate & plant room: what changes for pool tiles in the Gulf?

3 things change: sun, water and dosing. Strong sun fades some pigments and heats dark linings, so outdoor pools in the Gulf often use mid or light tones. Hard water leaves scale at the waterline, and coastal air carries salt onto the deck and coping, which shortens the life of cheap grout.

The plant room controls the rest. Correct, automatic dosing keeps combined chlorine at no more than 0.2 mg/L and the water balanced, which protects the grout as much as it protects swimmers. A pool is also kept full once it is tiled, because an empty basin in summer sun stresses the lining. Our page on swimming pools in Dubai covers design, approvals and the climate questions for villa and hotel pools in the UAE.

In what order is a pool tiled?

In 6 steps, after the shell is built and tested:

  1. Shell hardened and checked for level, with movement joints marked.
  2. Render and screed where the layout needs a true surface.
  3. Waterproofing applied as 1 continuous layer, including pipe and fitting collars.
  4. Tile layout drawn in plan and section: steps, waterline, lane marks and the edge.
  5. Tiling and grouting with pool-rated products, then the curing time the makers require.
  6. Controlled first fill, start-up of the plant and water balancing.

How long a pool takes to build depends on its type, size and site, and tiling is one stage within that. The residence pool hall on our Istinye Park Residence page shows a curved basin finished in mosaic, and our guide to pool maintenance covers the routine that keeps joints clean.

Sauna Dekor Spa Solutions is a sauna, steam room, hammam and pool manufacturer founded in 1987 and now in its 40th year of manufacturing in Istanbul, with a team of 19, TS EN ISO 9001:2015, and 5,000+ projects in 41+ countries, including 577+ hotel and resort projects. Every project carries a 24-month warranty on workmanship and manufacturing, a 24-month manufacturer's warranty on electrical and mechanical equipment, and a 5-year warranty on structure and waterproofing. We keep spare parts in stock in Istanbul for the equipment we install. Equipment and tiles are made by their manufacturers, whose certification belongs to them. Our Dubai office is in Latifa Tower, World Trade Centre. In the United States we offer planning and design only, from our Boston office.

Frequently asked questions about pool tiles

Can ordinary bathroom tiles be used in a pool?


No. A tile under water must be rated by its maker for permanent immersion and treated pool water. Bathroom wall tiles are not designed for that, and their joints and glaze fail sooner under constant water pressure.

Is glass mosaic or porcelain better for a pool?


Neither wins everywhere. Glass mosaic follows curves, steps and round basins; porcelain gives fewer joints on long straight walls and floors. Many pools combine both, with mosaic on the steps and waterline and porcelain on the main surfaces.

Why is epoxy grout used in pools?


Epoxy grout resists pool chemicals and does not wash out of the joints, so it suits heavily used or chemically aggressive pools. A cementitious CG2 grout approved for immersion is also used where the water is well balanced.

Do pool tiles make the pool waterproof?


No. The waterproofing layer under the adhesive keeps water in; the tiles and grout are the finish. That is why the waterproofing is applied as 1 continuous layer and tested before tiling starts.

Why do waterline tiles get dirty first?


The waterline collects sun cream, body oils and scale from hard water. A separate waterline band in an easy-to-clean tile, plus balanced water from the plant room, keeps that zone under control.

Can an existing pool be re-tiled?


Yes. The old tiles and adhesive are removed, the shell and waterproofing are checked and repaired, and the pool is tiled again with pool-rated products. Leaks found during that check are fixed before the new lining goes on.

Our work

Pool projects

Alican Aykaç, Managing Partner, Sauna Dekor
[ Author ]

Alican Aykaç · Managing Partner, Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions has designed, manufactured and installed saunas, steam rooms, hammams and pools since 1987, in its own facility in İkitelli OSB, Istanbul: 5,000+ projects in 41+ countries, including 577+ hotel and resort projects.

About Alican Aykaç

[ Related applications ]

Planning a room like this?

Send us the drawing or the room size. We will work out the heater, ventilation and finishes the room needs.

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote