+971 58 558 1295 ENTR Request a Quote
Marble hammam with a large heated platform, turquoise tiled panels, carved basins and cove lighting

[ Blog ]

Hammam vs Steam Room: Heat, Stone, Water and Build

Hammam vs steam room: how the heat source, the heated stone, the water, the space and the build time differ, and which one suits a villa or a hotel spa.

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

TopicHammam vs Steam Room
Reading6 minutes
Sections8
Published13 November 2026
Updated

Sauna Dekor Spa Solutions engineering team, Istanbul · project and press enquiries: Alican Aykaç, Managing Partner

Updated: 15 November 2026

Short answer: in the hammam vs steam room choice, the two rooms feel similar but are built differently. Both keep the room air at about 40–50 °C. A steam room fills a sealed box with steam at close to 100 % relative humidity; a hammam adds a heated marble platform, basins with running water and a washing ritual. Sauna Dekor Spa Solutions builds both, and this guide compares them on 5 points.

HammamSteam room
Room air40–50 °C, warm and moist40–50 °C at close to 100 % relative humidity
Heat sourceheated marble platform (göbek taşı) plus warm moist airsteam generator outside the room
Waterbasins (kurna) with hot and cold running water, floor drainscondensate and a floor drain; a hand shower is optional
Usewashing, scrubbing, foam massage and restingsitting in steam for a session
Build time in a homeabout 3–8 weeksdepends on size and finishes

Hammam vs steam room: how does the heat differ?

In a steam room all the heat comes from steam, so the air is close to 100 % relative humidity and every surface is wet. In a hammam the room air is also about 40–50 °C, but the main heat a guest feels comes from the marble platform underneath them. The experience is warm stone plus moist air.

The heated platform, the göbek taşı, is the centre of a Turkish hammam. The göbek taşı surface is kept at about 40–45 °C, warm enough to lie on during a scrub.

That difference changes the building services. A steam room needs a steam generator and a steam line; a hammam needs a heating layer under the stone and, in most of our projects, a steam source for the room air as well. Our hammam page explains the heating options.

How do water and drainage differ?

A hammam uses running water: guests pour it from marble basins, called kurna, and the floor carries it to drains. A steam room uses almost no water inside except the condensate and an optional hand shower. So a hammam has 2 water systems, supply to the basins and drainage across the floor; a steam room has mostly one.

We set the basins out to typical working values and finalise them in the project's own manufacture: a basin top at about 85–90 cm, a bowl of 45–60 cm across and 20–25 cm deep and at least 1.20 m between 2 basins. Those are the values we use in practice, not a fixed standard.

The floor falls to drains along the walls, and the stone is chosen to stay safe when wet and soapy.

Marble hammam at DDY Hotel with a central heated göbek taşı platform and four carved kurna basins
Marble hammam with a heated platform and 4 basins at DDY Hotel, Turkmenistan. Project photograph.

Which needs more space?

The hammam, almost always. A steam room can be a compact sealed room with benches on 1 or 2 walls. A hammam needs room for a heated platform that people lie on, basins along the walls with space in front of them, and often a warm room and a rest area beside the hot room. Turkish practice divides it into 3 parts.

Those 3 parts are the changing area, the warm room and the hot room. In a villa they are often reduced to a hot room with a small warm area, but the platform and the basins still set the minimum size.

Hotel hammam in striped marble with carved lattice wall panels, twin kurna basins and a central heated platform
The heated platform and the basins with space in front of them set the size of a hammam. Hotel project photograph; project not named.

A steam room is easier to fit into an existing bathroom or a narrow space. For that brief, see our steam room page.

How long does each take to build?

A hammam in a home takes about 3–8 weeks to build, and up to 12 weeks on large projects. A steam room is usually quicker because there is no stone platform to fabricate and no basin water system. In both, the waterproofing and its water test take the same care and time.

Most hammam time goes into stonework: cutting, fitting and finishing the platform, the basins and the walls, which we prepare and number in our workshop before installation. Our guide on how to build a hammam walks through the stages.

The steam generator for a steam room comes from its maker; we use Condair and size it to the room. See our steam generator page.

Steam room entrance with a mosaic bench at Diplomatic Club, Doha
Steam room entrance with a mosaic bench at Diplomatic Club, Doha. Project photograph.

Which suits a villa or a hotel spa?

It depends on how the space will be used. A steam room suits short, regular sessions for 1 to a few people and fits a small footprint. A hammam suits a washing ritual, a therapist-led scrub or a family that wants a social room, and it needs more space, more water and more build time.

Hotels often build both: a steam room in the thermal circuit and a hammam for treatments. In 2017 we delivered the spa and pool at Hilton Istanbul Maslak.

If you are comparing heat rooms more widely, our article on sauna vs steam room adds the dry-heat option, and our Moroccan bath page covers the other hammam tradition.

Who builds this

Sauna Dekor Spa Solutions has designed, manufactured and installed hammams, steam rooms, saunas and pools since 1987: 40 years of manufacturing in Istanbul, in our own facility in İkitelli OSB, with a team of 19 and TS EN ISO 9001:2015 certification (EKOL, certificate 202025106). We have delivered 5,000+ projects in 41+ countries, 577+ of them for hotels and resorts. Our hammam projects in the emirate are listed separately.

We give a 24-month warranty on workmanship and manufacturing; a 24-month manufacturer's warranty on electrical and mechanical equipment; and a 5-year warranty on structure and waterproofing.

Frequently asked questions about hammam vs steam room

Is a hammam the same as a steam room?


No. Both keep the air at about 40–50 °C, but a steam room is a sealed room filled with steam, while a hammam adds a heated marble platform, basins with running water and a washing and scrubbing ritual.

Which is hotter, a hammam or a steam room?


The room air is similar, about 40–50 °C in both. A steam room feels wetter because it runs at close to 100 % relative humidity. In a hammam much of the heat comes from the göbek taşı, whose surface is kept at about 40–45 °C.

Does a hammam need a steam generator?


Most of the hammams we build use one for the room air, together with a heating layer under the marble platform. A steam room relies on the steam generator alone, placed outside the room for service access.

Which takes longer to build?


Usually the hammam. In a home it takes about 3–8 weeks and up to 12 weeks on large projects, mostly because of the stone platform, basins and wall stonework. A steam room has none of that stonework.

Which fits a small space better?


A steam room. It can be a compact sealed room with benches on 1 or 2 walls. A hammam needs room for a platform to lie on and basins with space in front of them, so its minimum size is larger.

Can a villa have both a hammam and a steam room?


Yes, and they can share a plant room, drains and the corridor. Planning both from the start keeps the services simple; adding the second room later is harder if its pipes and power are not already in place.

Sources

  • Hammam — Wikipedia. Origins, rooms and the washing ritual.
  • Türk hamamı — Vikipedi. The 3-part plan, göbek taşı, basins and the dome.
  • Steam shower — Wikipedia. Steam generators and sealed enclosures.
  • How to build a steam room — Harvia. Steam room enclosure and generator placement.

Our work

From our spa projects

Alican Aykaç, Managing Partner, Sauna Dekor
[ Author ]

Alican Aykaç · Managing Partner, Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions has designed, manufactured and installed saunas, steam rooms, hammams and pools since 1987, in its own facility in İkitelli OSB, Istanbul: 5,000+ projects in 41+ countries, including 577+ hotel and resort projects.

About Alican Aykaç

[ Related applications ]

Planning a room like this?

Send us the drawing or the room size. We will work out the heater, ventilation and finishes the room needs.

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote