+971 58 558 1295 ENTR Request a Quote
Hammam wall of striped marble and gold mosaic strips with three carved basins and brass taps

[ Project ]

Olympic Of Complexes

Turkmenistan

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

Hammam and sauna built for a public Olympic sports complex in Turkmenistan — high-throughput durability, hygiene detailing, air handling and tanking.

  • Sauna
  • Turkish bath & hammam

[ 4 photos ]

From the project

Sauna

[ The build ]

01

Overview

Sauna Dekor designs, manufactures and installs saunas, hammams and steam rooms as a single contractor. The company was founded in 1987, is now in its 40th year, and works from its own production plant in İkitelli, Istanbul, with completed thermal areas in 41+ countries.

This page records the hammam and sauna built for an Olympic sports complex in Turkmenistan.The zones listed for the project are Turkish bath, hammam and sauna. It is a public athleticfacility rather than a hotel or a club, and that changes almost every decision.

02

Scope of work

Thermal rooms for athletes and public users: a marble hammam and a timber sauna, built to absorb continuous, high-volume use. The package covered room build-up and tanking, stone and mosaic, the heating circuits, the cabin with its heater and control, ventilation terminals,drainage and commissioning.

03

Designing for throughput

A hotel sauna serves a handful of guests an hour; a public sports complex serves a squadbetween sessions and then a queue behind them. The specification follows the throughput ratherthan the floor area. Bench area is maximised without compromising the height that makes the top bench work, because capacity is the whole point. Heaters and generators are chosen with substantial reserve, since the room is reopened and reloaded constantly and recovery is the only performance measure that matters. And every element that will be touched thousands of times a week — bench tops, door furniture, handrails, guards — is specified as a replaceablepart with a known supply route, not as part of a monolithic build. Seesauna andsauna and recovery.

04

Hygiene and cleaning

Public wet areas are cleaned aggressively and often, which is a material specification in itself. Surfaces have to tolerate repeated chemical cleaning without staining or losing their slip resistance; joints have to be closed and coved so nothing collects in a corner that a mopcannot reach; benching has to lift out so the floor beneath it can be washed. Drainage capacity is sized for wash-down as well as for bather use, which is a larger flow than a spa gully is normally asked to carry. Epoxy grout throughout — cement grout in a chemically cleaned public wet room has a short life.

05

Air, heat and tanking

The hammam is heated through the slab, navel stone and benches warmed from below, on a schedule that brings the room on before the facility opens. The sauna is sized by general practice at roughly a kilowatt of stone-heater output per cubic metre of volume with additions for glazing and masonry, then given reserve for throughput. Sauna air enters low near theheater and leaves low on the opposite side; the hammam runs continuous extract that continuesafter closing. Wet rooms were tanked before finishes, with a bonded membrane over the screed,tape into every corner, movement joint and penetration, and falls formed in the screed.

06

What we solved on site

Public buildings are commissioned to a deadline that does not move, and thermal rooms are the last trade in. We protected the programme by manufacturing and dry-assembling everything inour Istanbul workshop, shipping as one sequencedload with spares, and installing with our own crew, so no part of the critical path depended ona local supply chain. Handover covered cleaning method and shutdown as well as operation. Seecommercial spa andservices.

07

Frequently asked questions

How does a public sports facility change a sauna specification?

Throughput replaces floor area as the governing figure. Bench capacity is maximised without losing top-bench height, heaters are chosen with large recovery reserve, and every high-contact part is a replaceable item with a known supply route.

What does aggressive cleaning demand from the finishes?

Surfaces that tolerate repeated chemical cleaning without staining or losing slip resistance, coved and closed joints with no corners a mop cannot reach, liftable benching, and epoxy grout rather than cement.

Is drainage sized differently in a public wet area?

Yes. It is sized for wash-down as well as bather use, which is a considerably larger flow than a spa gully is usually asked to carry.

How is a fixed public deadline protected?

By manufacturing and dry-assembling off site, shipping as one sequenced load with spares, and installing with our own crew, so no part of the critical path depends on a local supply chain.

Sauna Dekor’s own certification is TS EN ISO 9001:2015 quality management, covering sauna and spa product manufacturing and after-sales service. The equipment we install carries CE / EN 60335, TÜV, GS, GREENGUARD Gold, FSC and VDI 6022 certification from its own manufacturers — EOS, Sentiotec and Condair among them.

Portfolio

Similar projects: same rooms, country or type of building

Have a similar project?

Send us your plan; we will work out the scope and the rooms it needs.

Last updated:

[ Related pages ]

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote