+971 58 558 1295 ENTR Request a Quote
Iznik tile panel and marble kurna basin against striped Marmara marble in a hotel hammam

[ Project ]

Novotel Istanbul Bomonti — Spa & Wellness

Istanbul · Türkiye

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

Sauna, steam room, hammam and treatment rooms at Novotel Istanbul Bomonti — commercial duty equipment, ventilation zoning and tanking practice.

  • Sauna
  • Steam room
  • Turkish bath & hammam
  • Massage room

Project summary

What we delivered

  • Rooms: Sauna, Steam Room, Hammam & Massage Room
  • Where and when: Istanbul · Türkiye, 2025
  • Equipment: Condair steam generator

[ 14 photos ]

From the project

Hammam
Hammam
Hammam
Hammam
Hammam
Sauna
Steam room
Steam room
Steam room
Steam room
Pool

[ The build ]

01

Overview

Project facts: Delivered 2025 · Bomonti, Istanbul, Türkiye · Scope: sauna, steam room, hammam, treatment room · Equipment: Condair steam generator

Sauna Dekor designs, manufactures and installs saunas, hammams and steam rooms as a single contractor. The company was founded in 1987, is now in its 40th year, and works from its own production plant in İkitelli, Istanbul, with completed thermal areas in 41+ countries.

This page records the spa and wellness thermal areas at Novotel Istanbul Bomonti. The zoneslisted for the project are sauna, steam room, hammam and massage rooms.

02

Scope of work

A complete hotel wellness floor: a marble hammam, a steam room, a timber sauna cabin and arun of treatment rooms, arranged so a guest can move through the circuit and finish somewhere quiet. Our photographic record of the job runs to thirteen frames across the four room types.The package covered room build-up and tanking, marble and mosaic, the cabin, the generator and heater equipment, ventilation terminals, drainage and commissioning.

03

Specifying for hotel duty

The single biggest difference between a hotel thermal room and a domestic one is that the hotel room is never off. Heaters are therefore commercial units with serviceable elements andan accessible control cabinet, sited outside the cabin, timed and setpoint-limited so a guest cannot leave the room running flat out. Steam generators are chosen on recovery: general practice sizes on enclosure volume with a correction for the finish material, then adds headroom for door openings, and a hotel door opens far more often than any volume-based calculation implies. Benching is built in liftable sections so a damaged bench top can be replaced without dismantling the cabin — a detail that costs nothing at manufacture and saves a closure later. Ourcommercial sauna specification page covers the reasoning.

04

Ventilation zoning across four room types

Four room types means four air regimes in one small floor plate. The sauna takes supply low near the heater and extract low on the opposite side. The steam room and the hammam take continuous extract that runs on past closing so both dry down overnight. The treatment rooms must stay dry and quiet, so they are held slightly positive against the wet circuit and separated from the plant acoustically. Getting the pressure regime right across those zones isa coordination job with the hotel’s own ventilation contractor, and it has to be settled on drawings before ceilings close — after that it becomes an argument rather than a design.

05

Tanking, falls and finishes

Wet rooms were tanked before any finish went down: a bonded membrane over the screed, taped into corners, movement joints and every service penetration, dressed into the gullies and takenup the walls past splash height. Falls formed in the screed, never made up in the tileadhesive. Epoxy grout in the permanently wet rooms. In the hammam the ceiling is vaulted so condensate runs to the perimeter instead of dripping. Cabin timber is kiln-dried and low in resin with concealed fixings, so nothing hot is presented to skin. Product detail onsauna,steam room andmassage room.

06

What we solved on site

The wellness floor sits inside an operating hotel, which turns a construction problem into a logistics one: deliveries have to come in through service routes on a schedule that does not collide with guest movements, and noisy work has a window rather than a day. We handled it by manufacturing and dry-assembling in our Istanbul workshop, delivering in numbered lots matched to the install sequence, and keeping the cutting work off site. The other constraint was the hammam ceiling — vaulting it inside a hotel slab-to-slab height meant setting the dome geometry before the ductwork was routed rather than after. SeeIstanbul andhotel spa design.

07

Frequently asked questions

What makes a hotel sauna different to specify?

It is never off. Heaters are commercial units with serviceable elements, controls sit outside the cabin and are timed and setpoint-limited, and benches are built in liftable sections so a damaged top can be replaced without stripping the cabin.

How many ventilation regimes does a small wellness floor need?

One per room type. Sauna gets supply low at the heater with low extract opposite; steam room and hammam get continuous extract that runs past closing; treatment rooms are kept dry, quiet and slightly positive against the wet circuit.

Why does a hammam ceiling have to be vaulted?

Condensate. A curved soffit runs the water that forms on the ceiling to the perimeter and into drainage; a flat one collects it into drips. Inside a hotel slab-to-slab height the vault has to be set before ductwork is routed.

Can this be built while the hotel stays open?

Yes, with planning. Manufacturing and dry assembly happen in our Istanbul workshop, delivery arrives in numbered lots matched to the install sequence, and cutting work is kept off site so noise and dust stay out of the hotel.

Sauna Dekor’s own certification is TS EN ISO 9001:2015 quality management, covering sauna and spa product manufacturing and after-sales service. The equipment we install carries CE / EN 60335, TÜV, GS, GREENGUARD Gold, FSC and VDI 6022 certification from its own manufacturers — EOS, Sentiotec and Condair among them.

Have a similar project?

Send us your plan; we will work out the scope and the rooms it needs.

Last updated:

[ Related pages ]

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote