EOS Compact DP / HP — manufacturer's product shot 1

EOS Compact DP / HP — manufacturer's product shot 1, manufacturer product image 2

EOS Compact DP / HP — manufacturer's product shot 1, manufacturer product image 3

Manufacturer product image

EOS Compact DP / HP — control unit

EOS

Short answer: EOS Compact DP / HP is a control unit made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the saunas and steam rooms we build; the product and its certificates are the manufacturer's.

A common control unit at residential scale; a combi (humid) version is available.

Category: Control units
Series: Standard series
Manufacturer: EOS Saunatechnik · Germany
Capacity: Selected by cabin volume
Warranty: 24 months — with Sauna Dekor installation

Request a quote

Model note

What the EOS Compact DP / HP is

The Compact DP and HP are the standard-range members of the Compact family: 10 kW switching capacity, a 3.5-inch colour TFT display and multifunction keys. The housing measures 220 × 255 × 65 mm and is only 65 mm deep; it mounts on the wall or sits partly recessed in the plaster. It stores four user profiles, keeps the remaining time on the display, and runs a 24-hour pre-set timer with a safety interlock. Heating time is 6, 12, 18 hours or unlimited; the safety temperature limiter is set at 139 °C. Lighting and fan outputs are ready to use. The DP is for the dry Finnish sauna, while the HP manages humid operation with all EOS Combi heaters up to 10 kW; in combi mode the range is 30 °C – 70 °C.

Technical specifications

EOS Compact DP / HP specifications

Category	Control units
Series	Standard series
Manufacturer	EOS Saunatechnik · Germany
Capacity	Selected by cabin volume
Warranty	24 months — with Sauna Dekor installation
Electrical connection	400 V 3N ~ 50/60 Hz
Switching capacity	10.0 kW, extendable
Temperature control range	30 – 115 °C (Finnish) 30 – 70 °C (Combi)
Pre-set timer	24 h or recurring switching timer
Heating time limitation	6 h, 12 h, 18 h, unlimited
Dimensions H/W/D	220 x 255 x 65 mm
Ambient temperature in operation	-10 to +40 °C
Weight without packaging	approx. 1.2 kg

Values: EOS Saunatechnik's published product information (read 23 October 2026). Dimensions, weights and supply figures not listed here are sent with the manufacturer's technical sheet.

Selection

How we find the right capacity

We work out the capacity from the cabin volume; the five steps below are done together at the quotation stage.

Start with the cabin volume

Basic rule: cabin volume (m³) × 1 kW. A 2 × 2 × 2.10 m cabin is 8.4 m³ and needs about 9 kW. This figure is a starting point, not the answer.

Add glass and uninsulated surfaces

Add 1.2 m³ to the volume for every m² of glass front, and about 1.2 m³ for every m² of uninsulated concrete or stone. In a cabin with a full glass front, the real requirement is thirty to forty percent above the bare volume.

Agree the power supply early

Above 9 kW a 400 V three-phase supply is required; for lower outputs the phase is chosen according to the heater's installation manual. The heater is fed on its own circuit, with its own fuse and residual current device.

State the usage intensity

A home cabin used two hours a day and a hotel cabin open for ten hours cannot use the same unit. For commercial use, heavy-duty (HD) units and a larger stone mass are chosen.

Choose the control together with the heater

The power a control unit can switch directly is limited; above that, a PEB power boost unit is needed. This is calculated at the quotation stage.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Close alternatives: the EOS Econ 2, the EOS Econ 1, the EOS PEB 10.

Frequently asked questions

Who manufactures the EOS Compact DP / HP?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS Compact DP / HP?

Yes. We size, supply and install the EOS Compact DP / HP as part of the saunas and steam rooms we design, manufacture and build, in the UAE, Saudi Arabia, Qatar and other markets.

What are the main specifications of the EOS Compact DP / HP?

Category: Control units; Series: Standard series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

EOS

Close alternatives

EOS Econ 2Control units EOS Econ 1Control units EOS PEB 10Control units

Is the EOS Compact DP / HP right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Request a quote +971 58 558 1295

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated: 29 October 2026