EOS 34.G HD sauna heater, manufacturer product photo, manufacturer product image 1

EOS 34.G HD sauna heater, manufacturer product photo, manufacturer product image 2

Manufacturer product image

EOS 34.G HD — sauna heater

EOS

Short answer: EOS 34.G HD is a sauna heater made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the saunas and steam rooms we build; the product and its certificates are the manufacturer's.

A heavy-duty body; for cabins running more than ten hours a day.

Category: Sauna heaters
Series: Commercial — large scale
Power options: 15 kW · 18 kW · 21 kW · 24 kW · 27 kW · 30 kW · 36 kW
Manufacturer: EOS Saunatechnik · Germany
Capacity: Selected by cabin volume
Warranty: 24 months — with Sauna Dekor installation

Request a quote

Model note

What the EOS 34.G HD is

The 34.G HD is a heavy-duty class heater: its internal wiring runs on solid copper busbars, and the triple-shell housing is stainless steel throughout. The stone chamber sits above the elements on V-profile supports; these profiles both regulate convection and stop poured water from running underneath. Two housing sizes are available: 95 × 75 × 53 cm with 30 kg of stones for 15–21 kW, and 95 × 100 × 53 cm with 45 kg of stones for 24–36 kW. An optional add-on frame increases the stone volume by a further 30 kg. Seven ratings run from 15 kW for 18–25 m³ up to 36 kW for 65–75 m³. At 15–18 kW a PEB 10 is required, from 21 kW a PEB 18, and from 30 kW a PEB 36. The Combi version has a 4 kW evaporator and a 10-litre tank.

Technical specifications

EOS 34.G HD specifications

Category	Sauna heaters
Series	Commercial — large scale
Power options	15 kW · 18 kW · 21 kW · 24 kW · 27 kW · 30 kW · 36 kW
Manufacturer	EOS Saunatechnik · Germany
Capacity	Selected by cabin volume
Warranty	24 months — with Sauna Dekor installation
Electrical connection	400 V 3N ~ 50/60 Hz
Dimensions H/W/D in cm: 15 - 21 kW 24 - 36 kW	95 / 75 / 53 95 / 100 / 53
Fuse protection (control unit)	3 x 16 A
Stone filling (15 - 21 / 24 - 36 kW)	30 / 45 kg
Compatible control units	EOS Econ 4 series · EOS Compact DC/HC series · EOS Compact D18/H18 series · EOS EmoStyle series · EOS EmoStyle Hi series · EOS U-Command · EOS EmoTouch 3 · PEB 10 · PEB 18 / 18 H · PEB 36 / 36 H

Values: EOS Saunatechnik's published product information (read 23 October 2026). Dimensions, weights and supply figures not listed here are sent with the manufacturer's technical sheet.

Selection

How we find the right capacity

We work out the capacity from the cabin volume; the five steps below are done together at the quotation stage.

Start with the cabin volume

Basic rule: cabin volume (m³) × 1 kW. A 2 × 2 × 2.10 m cabin is 8.4 m³ and needs about 9 kW. This figure is a starting point, not the answer.

Add glass and uninsulated surfaces

Add 1.2 m³ to the volume for every m² of glass front, and about 1.2 m³ for every m² of uninsulated concrete or stone. In a cabin with a full glass front, the real requirement is thirty to forty percent above the bare volume.

Agree the power supply early

Above 9 kW a 400 V three-phase supply is required; for lower outputs the phase is chosen according to the heater's installation manual. The heater is fed on its own circuit, with its own fuse and residual current device.

State the usage intensity

A home cabin used two hours a day and a hotel cabin open for ten hours cannot use the same unit. For commercial use, heavy-duty (HD) units and a larger stone mass are chosen.

Choose the control together with the heater

The power a control unit can switch directly is limited; above that, a PEB power boost unit is needed. This is calculated at the quotation stage.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Close alternatives: the EOS Herkules XL S120 HD, the EOS Goliath HD, the EOS Orbit.

Frequently asked questions

Who manufactures the EOS 34.G HD?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS 34.G HD?

Yes. We size, supply and install the EOS 34.G HD as part of the saunas and steam rooms we design, manufacture and build, in the UAE, Saudi Arabia, Qatar and other markets.

What are the main specifications of the EOS 34.G HD?

Category: Sauna heaters; Series: Commercial — large scale; Power options: 15 kW · 18 kW · 21 kW · 24 kW · 27 kW · 30 kW · 36 kW; Manufacturer: EOS Saunatechnik · Germany. Values are from the manufacturer's published product information.

Sources

EOS

Close alternatives

EOS Herkules XL S120 HDSauna heaters EOS Goliath HDSauna heaters EOS OrbitSauna heaters

Is the EOS 34.G HD right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Request a quote +971 58 558 1295

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated: 29 October 2026