+971 58 558 1295 ENTR Request a Quote
EOS 46.U — manufacturer's product shot 1
EOS 46.U — manufacturer's product shot 1, manufacturer product image 2

Manufacturer product image

EOS 46.U — sauna heater

EOS

Short answer: EOS 46.U is a sauna heater made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the saunas and steam rooms we build; the product and its certificates are the manufacturer's.

Concealed installation — a heater that sits behind the bench.

Category
Sauna heaters
Series
Commercial — small scale
Power options
6 kW · 7,5 kW · 9 kW · 12 kW
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Warranty
24 months — with Sauna Dekor installation
Request a quote

Model note

What the EOS 46.U is

The 46.U is a horizontal body hidden behind the bench: 22 cm between the partition wall and the sauna wall is enough, and the heater itself is 20 cm deep. The space gained goes straight back into the bench. There is no risk of touching the heater, and the guard grille fitted to the top edge of the partition wall catches objects falling from above. Löyly is possible: the funnel and hose come with the unit, and the channel inside spreads the water across the full width of the body. Inner and outer shells are stainless, with a dust and water tray underneath. The 46.U takes 15 kg of stones and the Compact version 10 kg. Coverage runs from 6 kW for 6–8 m³ to 12 kW for 14–18 m³; the 12 kW needs a PEB 10. The Combi version has a 1.5 kW evaporator and a 5-litre tank.

Technical specifications

EOS 46.U specifications

CategorySauna heaters
SeriesCommercial — small scale
Power options6 kW · 7,5 kW · 9 kW · 12 kW
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume
Warranty24 months — with Sauna Dekor installation
Electrical connection400 V 3N ~ 50/60 Hz
Fuse protection (control unit)3 x 16 A
Dimensions H/W/D, in cm87 / 92 / 20 (46.U Compact) 87 / 112 / 20 (46.U) 100 / 112 / 20 (46.U Combi)
For sauna cabin size (6,0 / 7,5 / 9,0 / 12,0 kW)6 – 8 m³ / 7 – 10 m³ / 9 – 14 m³ / 14 – 18 m³
Min. size air inlet and outlet (6,0 / 7,5 / 9,0 / 12,0 kW)35 x 4 cm / 35 x 5 cm / 35 x 6 cm / 35 x 7 cm
Stone filling10 kg (Compact) / 15 kg
Power extension requiredNo / PEB 10 (12.0 kW)
Compatible control unitsEOS Econ 4 series · EOS Compact DC/HC series · EOS Compact D18/H18 series · EOS EmoStyle series · EOS EmoStyle Hi series · EOS U-Command · EOS EmoTouch 3 · PEB 10

Values: EOS Saunatechnik's published product information (read 23 October 2026). Dimensions, weights and supply figures not listed here are sent with the manufacturer's technical sheet.

Selection

How we find the right capacity

We work out the capacity from the cabin volume; the five steps below are done together at the quotation stage.

01

Start with the cabin volume

Basic rule: cabin volume (m³) × 1 kW. A 2 × 2 × 2.10 m cabin is 8.4 m³ and needs about 9 kW. This figure is a starting point, not the answer.

02

Add glass and uninsulated surfaces

Add 1.2 m³ to the volume for every m² of glass front, and about 1.2 m³ for every m² of uninsulated concrete or stone. In a cabin with a full glass front, the real requirement is thirty to forty percent above the bare volume.

03

Agree the power supply early

Above 9 kW a 400 V three-phase supply is required; for lower outputs the phase is chosen according to the heater's installation manual. The heater is fed on its own circuit, with its own fuse and residual current device.

04

State the usage intensity

A home cabin used two hours a day and a hotel cabin open for ten hours cannot use the same unit. For commercial use, heavy-duty (HD) units and a larger stone mass are chosen.

05

Choose the control together with the heater

The power a control unit can switch directly is limited; above that, a PEB power boost unit is needed. This is calculated at the quotation stage.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

On site: we fitted a 9.0 kW EOS 46.U in a yacht sauna — see the yacht sauna project.

Close alternatives: the EOS 46.U XL, the EOS 34.G HD, the EOS Herkules XL S120 HD.

Frequently asked questions

Who manufactures the EOS 46.U?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS 46.U?

Yes. We size, supply and install the EOS 46.U as part of the saunas and steam rooms we design, manufacture and build, in the UAE, Saudi Arabia, Qatar and other markets.

What are the main specifications of the EOS 46.U?

Category: Sauna heaters; Series: Commercial — small scale; Power options: 6 kW · 7,5 kW · 9 kW · 12 kW; Manufacturer: EOS Saunatechnik · Germany. Values are from the manufacturer's published product information.

Sources

Related pages

Is the EOS 46.U right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

WhatsApp Call now