+971 58 558 1295 ENTR Request a Quote
Grey mosaic steam room with a contoured bench, sloped backrest and a floor drain

[ Project ]

Four Seven Hotel

Istanbul · Türkiye

Sauna Dekor Spa Solutions — designing, manufacturing and installing saunas, steam rooms, hammams and pools since 1987, in our own facility in İkitelli OSB, Istanbul.

Iznik-tiled hammam with marble kurna basins and steam rooms at the Four Seven Hotel, Istanbul — tile fixing over heated stone, tanking and falls.

In brief (November 2026): Sauna Dekor built the Turkish bath (hammam) and steam rooms for Four Seven Hotel, Istanbul, Türkiye.

  • Steam room
  • Turkish bath & hammam

[ 2 photos ]

From the project

[ The build ]

01

Overview

Sauna Dekor designs, manufactures and installs saunas, hammams and steam rooms as a single contractor. The company was founded in 1987, is now in its 40th year, and works from its own production plant in İkitelli, Istanbul, with completed thermal areas in 41+ countries.

This page records the hammam and steam rooms at the Four Seven Hotel in the Aksaray district of Istanbul. The zones listed for the project are Turkish bath, hammam and steam rooms; the photographic record shows an Iznik-tiled hammam with marble kurna basins.

02

Scope of work

A traditional decorated hammam rather than a plain marble one: Iznik-style tiling to the walls, marble kurna washing basins, heated benching and navel stone, with steam roomscompleting the circuit. Our package covered the room build-up and tanking, the stone and tilework, the heating circuits and control, ventilation terminals, drainage and commissioning.

03

Fixing decorative tile over a heated substrate

Decorated hammam walls look like a finishes question and are really a movement question.Behind the tile sits a wall that is warm, damp and in a room that cycles daily between soak temperature and cold. Tile, adhesive, render and substrate all expand at different rates, sothe build-up has to be specified as a system: a deformable adhesive rather than a rigid one,movement joints designed into the tile grid rather than cut in later where a crack has alreadystarted, and grout that stays flexible enough to absorb what is left. Skipping any of these does not fail on handover; it fails in the second or third year, which is why it is so oftenattributed to the tiles rather than to the detail behind them.

04

Kurna basins and the geometry they set

The kurna is the marble basin a bather washes at, and its position governs far more than its own footprint: bench lengths either side, the seated clearance a bather needs to pour, the hot and cold supply runs behind the wall, and the direction of every floor fall. We set kurna and gully positions first, resolved the falls against them, then cut the marble to suit. In a decorated hammam this matters twice over, because the tile grid also has to land correctly around the basins — a pattern that dies awkwardly into a kurna is visible for the life of theroom. Read more on what is a Turkish bath and modern hammam.

05

Heat, air and tanking

The hammam is heated through its slab, with navel stone and benches warmed from below, amoderate air temperature and high humidity; the room needs a long soak before opening ratherthan a thermostat chasing setpoint. Steam enclosures are sized on volume with a correction forthe finish, plus reserve for door openings. Extract runs continuously and on past closing so both rooms dry down overnight. All wet rooms were tanked before finishes — bonded membrane over the screed, reinforcing tape into corners, movement joints and penetrations, falls in thescreed, epoxy grout above. See alsosteam room.

06

What we solved on site

Setting out was the whole job here. A decorated hammam has to satisfy three grids at once —drainage falls, the marble bench and kurna layout, and the tile pattern — and they do not naturally agree. We resolved them on the shop drawings, dry-laid the tile and stone in ourIstanbul workshop to confirm the pattern landedcorrectly at every corner and basin, then numbered and delivered. That way the only decisions left on site were fixing decisions, not composition ones. More athotel spa design andservices.

07

Frequently asked questions

Why does decorative tile in a hammam need special detailing?

Because the wall behind it is warm and damp and cycles daily. Tile, adhesive, render and substrate move at different rates, so the build-up needs a deformable adhesive, designed movement joints and flexible grout — otherwise it fails in year two or three.

What does the kurna position govern?

Bench lengths either side, the seated clearance needed to pour, the supply runs behind the wall, the direction of every floor fall and, in a decorated room, where the tile pattern lands. It is set first, not last.

How is a tile pattern reconciled with drainage falls?

On the shop drawings, then by dry-laying the tile and stone in the workshop to confirm the pattern lands correctly at every corner and basin. On site the only decisions left should be fixing decisions.

Does a hammam need a warm-up period?

Yes. Heat is stored in the stone rather than the air, so the room takes a long soak to reach working surface temperature and is brought on before the spa opens rather than at the first booking.

Sauna Dekor’s own certification is TS EN ISO 9001:2015 quality management, covering sauna and spa product manufacturing and after-sales service. The equipment we install carries CE / EN 60335, TÜV, GS, GREENGUARD Gold, FSC and VDI 6022 certification from its own manufacturers — EOS, Sentiotec and Condair among them.

Portfolio

Similar projects: same rooms, country or type of building

Have a similar project?

Send us your plan; we will work out the scope and the rooms it needs.

Last updated:

[ Related pages ]

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote