+971 58 558 1295 ENTR Request a Quote
EOS Thermat — manufacturer's product shot 1
EOS Thermat — manufacturer's product shot 1, manufacturer product image 2
EOS Thermat — manufacturer's product shot 1, manufacturer product image 3

Manufacturer product image

EOS Thermat — sauna heater

EOS

Short answer: EOS Thermat is a sauna heater made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the saunas and steam rooms we build; the product and its certificates are the manufacturer's.

A universal heater for domestic cabins — the body with the widest range of use in the series.

Category
Sauna heaters
Series
Standard series
Power options
4,5 kW · 6 kW · 7,5 kW · 9 kW
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Warranty
24 months — with Sauna Dekor installation
Request a quote

Model note

What the EOS Thermat is

The Thermat range both stands on the floor and hangs on the wall — two installation options for the same body, which makes it flexible in residential projects. The top cover is cast aluminium, the outer shell a scratch-resistant anthracite pearl-effect coating, and the stone chamber stainless steel. Only 4 cm clearance to combustible material is required at the sides; in narrow cabins that figure is what saves the gaps between bench and wall. The chamber takes 15 kg of stones. The floor type measures 76 × 37.5 × 38 cm and the wall type 58 × 37.5 × 38 cm. The 4.5 kW covers 4–6 m³ and the 9 kW up to 9–14 m³. The Combi version has a 1.5 kW evaporator on the right-hand side and a manually filled 5-litre tank; dry-run protection gives an audible warning.

Technical specifications

EOS Thermat specifications

EOS Thermat specifications
CategorySauna heaters
SeriesStandard series
Power options4,5 kW · 6 kW · 7,5 kW · 9 kW
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume
Warranty24 months — with Sauna Dekor installation
Electrical connection400 V 3N ~ 50/60 Hz 400V 3N / 230V 1N universal (Thermat W)
Fuse protection (control unit)3 x 16 A
Dimensions H/W/D, in cm76 x 37.5 x 38 (Thermat) 58 x 37.5 x 38 (Thermat W) 76 x 45 x 38 (Thermat Combi) 58 x 45 x 38 (Thermat Combi W)
For sauna cabin size (4,5 / 6,0 / 7,5 / 9,0 kW)4 – 6 m³ / 6 – 8 m³ / 7 – 10 m³ / 9 – 14 m³
Min. size of air intake and outlet (4,5 / 6,0 / 7,5 / 9,0 kW)35 x 3 cm / 35 x 4 cm / 35 x 5 cm / 35 x 6 cm
Stone filling15 kg
Power extension neededNo
Compatible control unitsEOS Econ 1 series · EOS Econ 2 series · EOS Compact DP/HP series · EOS EmoTec series

Values: EOS Saunatechnik's published product information (read 23 October 2026). Dimensions, weights and supply figures not listed here are sent with the manufacturer's technical sheet.

Selection

How we find the right capacity

We work out the capacity from the cabin volume; the five steps below are done together at the quotation stage.

01

Start with the cabin volume

Basic rule: cabin volume (m³) × 1 kW. A 2 × 2 × 2.10 m cabin is 8.4 m³ and needs about 9 kW. This figure is a starting point, not the answer.

02

Add glass and uninsulated surfaces

Add 1.2 m³ to the volume for every m² of glass front, and about 1.2 m³ for every m² of uninsulated concrete or stone. In a cabin with a full glass front, the real requirement is thirty to forty percent above the bare volume.

03

Agree the power supply early

Above 9 kW a 400 V three-phase supply is required; for lower outputs the phase is chosen according to the heater's installation manual. The heater is fed on its own circuit, with its own fuse and residual current device.

04

State the usage intensity

A home cabin used two hours a day and a hotel cabin open for ten hours cannot use the same unit. For commercial use, heavy-duty (HD) units and a larger stone mass are chosen.

05

Choose the control together with the heater

The power a control unit can switch directly is limited; above that, a PEB power boost unit is needed. This is calculated at the quotation stage.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Close alternatives: the EOS Moment, the EOS Edge, the EOS EuroMax.

Frequently asked questions

Who manufactures the EOS Thermat?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS Thermat?

Yes. We size, supply and install the EOS Thermat as part of the saunas and steam rooms we design, manufacture and build, in the UAE, Saudi Arabia, Qatar and other markets.

What are the main specifications of the EOS Thermat?

Category: Sauna heaters; Series: Standard series; Power options: 4,5 kW · 6 kW · 7,5 kW · 9 kW; Manufacturer: EOS Saunatechnik · Germany. Values are from the manufacturer's published product information.

Sources

Related pages

Last updated:

Is the EOS Thermat right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote