+971 58 558 1295 ENTR Request a Quote
EOS BlackRock — manufacturer's product shot 1
EOS BlackRock — manufacturer's product shot 1, manufacturer product image 2

Manufacturer product image

EOS BlackRock — sauna heater

EOS

Short answer: EOS BlackRock is a sauna heater made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the saunas and steam rooms we build; the product and its certificates are the manufacturer's.

A body that stands out for its distinctive design.

Category
Sauna heaters
Series
Commercial — small scale
Power options
12 kW · 15 kW · 18 kW
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Warranty
24 months — with Sauna Dekor installation
Request a quote

Model note

What the EOS BlackRock is

BlackRock is a cubic commercial body whose four faces look alike; because the cable connects from below, it can be installed in front of glass or in the middle of the cabin. The side channels are left unusually wide, so convection stays stable even under heavy use. The side panels are anthracite and the corners and top cover polished stainless; an all-over matt black version is also available. The stone chamber holds 40 kg, the unit measures 83 × 55.5 × 55.5 cm and weighs 40 kg without stones. 12 kW covers 14–18 m³, 15 kW covers 18–25 m³ and 18 kW covers 24–30 m³, and every output needs a PEB 10. A 3 kW external evaporator can be added later on site; it measures 76 × 39.5 × 10.5 cm.

Technical specifications

EOS BlackRock specifications

CategorySauna heaters
SeriesCommercial — small scale
Power options12 kW · 15 kW · 18 kW
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume
Warranty24 months — with Sauna Dekor installation
Electrical connection400 V 3N ~ 50/60 Hz (Sauna heater) 230 V 1N ~ 50 Hz (Vaporizer)
Fuse protection (control unit)3 x 16 A
Fuse protection LSG unit3 x 16 A
Dimensions H/W/D, in cm83 / 55.5 / 55.5 (Sauna heater) 76 x 39.5 x 10.5 (Vaporizer)
For sauna cabin size (12/15/18 kW)14 -18 m³ / 18 -25 m³ / 24 -30 m³
Min. size air inlet and outlet (12/15/18 kW)35 x 7 cm / 35 x 9 cm / 35 x 11 cm
Weight without stones40 kg
Stone filling40 kg
Power extension requiredPEB 10
Compatible control unitsEOS Econ 4 series · EOS Compact DC/HC series · EOS Compact D18/H18 series · EOS EmoStyle series · EOS EmoStyle Hi series · EOS U-Command · EOS EmoTouch 3 · PEB 10

Values: EOS Saunatechnik's published product information (read 23 October 2026). Dimensions, weights and supply figures not listed here are sent with the manufacturer's technical sheet.

Selection

How we find the right capacity

We work out the capacity from the cabin volume; the five steps below are done together at the quotation stage.

01

Start with the cabin volume

Basic rule: cabin volume (m³) × 1 kW. A 2 × 2 × 2.10 m cabin is 8.4 m³ and needs about 9 kW. This figure is a starting point, not the answer.

02

Add glass and uninsulated surfaces

Add 1.2 m³ to the volume for every m² of glass front, and about 1.2 m³ for every m² of uninsulated concrete or stone. In a cabin with a full glass front, the real requirement is thirty to forty percent above the bare volume.

03

Agree the power supply early

Above 9 kW a 400 V three-phase supply is required; for lower outputs the phase is chosen according to the heater's installation manual. The heater is fed on its own circuit, with its own fuse and residual current device.

04

State the usage intensity

A home cabin used two hours a day and a hotel cabin open for ten hours cannot use the same unit. For commercial use, heavy-duty (HD) units and a larger stone mass are chosen.

05

Choose the control together with the heater

The power a control unit can switch directly is limited; above that, a PEB power boost unit is needed. This is calculated at the quotation stage.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Close alternatives: the EOS Watermill Sauna, the EOS Invisio, the EOS 46.U.

Frequently asked questions

Who manufactures the EOS BlackRock?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS BlackRock?

Yes. We size, supply and install the EOS BlackRock as part of the saunas and steam rooms we design, manufacture and build, in the UAE, Saudi Arabia, Qatar and other markets.

What are the main specifications of the EOS BlackRock?

Category: Sauna heaters; Series: Commercial — small scale; Power options: 12 kW · 15 kW · 18 kW; Manufacturer: EOS Saunatechnik · Germany. Values are from the manufacturer's published product information.

Sources

Related pages

Is the EOS BlackRock right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote