+971 58 558 1295 ENTR Request a Quote
EOS Orbit sauna heater, manufacturer product photo, manufacturer product image 1
EOS Orbit sauna heater, manufacturer product photo, manufacturer product image 2
EOS Orbit sauna heater, manufacturer product photo, manufacturer product image 3

Photo: EOS Saunatechnik

EOS Orbit — sauna heater

EOS · EOS Sauna Heaters

Short answer: EOS Orbit is a sauna heater made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the saunas we build; the product and its certificates are the manufacturer's.

A higher-class body in a distinctive round design, for commercial sauna operation.

Category
Sauna heaters
Series
Commercial — large scale
Power options
18 kW · 21 kW · 24 kW
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Request a quote

EOS Sauna Heaters

Model note

What the EOS Orbit is

The Orbit is a round heater built for commercial operation: 65.5 cm in diameter, 92 cm high, weighing around 55 kg without stones. Because the cable connects from below and out of sight, it can be placed in front of glass panels or right in the middle of the cabin. The stone compartment is separate from the elements, which keeps convection stable and extends element life. The chamber takes around 40 kg of stones. The finish is anthracite pearl effect and the body is stainless steel. 18 kW covers 24–30 m³, 21 kW covers 30–34 m³ and 24 kW covers 35–40 m³; at 18 kW a PEB 10 is required, at 21 and 24 kW a PEB 18. Brackets for the round guard rail come in the box; the rail is available in abachi or walnut, at 360° or 270°.

Close alternatives we also supply and install: the EOS Zeus HD (20 kW · 24 kW · 30 kW · 36 kW), the EOS Mega HD (36 kW · 42 kW · 48 kW · 54 kW · 60 kW · 72 kW), the EOS EmoTec (Control units). It belongs to the EOS Sauna Heaters. The EOS overview lists every range.

Technical specifications

EOS Orbit specifications

EOS Orbit specifications
CategorySauna heaters
SeriesCommercial — large scale
Power options18 kW · 21 kW · 24 kW
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume
Electrical connection400 V 3N ~ 50/60 Hz
Fuse protection (control unit)3 x 16 A
Fuse protection LSG unit3 x 16 A / 3 x 35 A (only 21 and 24 kW)
Dimensions (W x H)65.5 x 92 cm
Weight without stones~ 55 kg
Stone filling40 kg
Power extension requiredPEB 10 / PEB 18 (only 21 and 24 kW)
Compatible control unitsEOS Econ 4 series · EOS Compact DC/HC series · EOS Compact D18/H18 series · EOS EmoStyle series · EOS EmoStyle Hi series · EOS U-Command · EOS EmoTouch 3 · PEB 10 · PEB 18 / 18 H

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Selection

How we find the right capacity

We work out the capacity from the cabin volume; the five steps below are done together at the quotation stage.

01

Start with the cabin volume

Basic rule: cabin volume (m³) × 1 kW. A 2 × 2 × 2.10 m cabin is 8.4 m³ and needs about 9 kW. This figure is a starting point, not the answer.

02

Add glass and uninsulated surfaces

By Harvia's rule, each m² of glass front adds 1.2 m³ to the volume, and each m² of uninsulated concrete or stone adds about 1.2 m³. In a cabin with a full glass front, the real requirement is thirty to forty per cent above the bare volume.

03

Agree the power supply early

Above 9 kW a 400 V three-phase supply is required; for lower outputs the phase is chosen according to the heater's installation manual. The heater is fed on its own circuit, with its own fuse and residual current device.

04

State the usage intensity

A home cabin used two hours a day and a hotel cabin open for ten hours cannot use the same unit. For commercial use, heavy-duty (HD) units and a larger stone mass are chosen.

05

Choose the control together with the heater

The power a control unit can switch directly is limited; above that, a PEB power boost unit is needed. This is calculated at the quotation stage.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS Orbit?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS Orbit?

Yes. We size, supply and install the EOS Orbit as part of the saunas we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS Orbit?

Category: Sauna heaters; Series: Commercial — large scale; Power options: 18 kW · 21 kW · 24 kW; Manufacturer: EOS Saunatechnik · Germany. Values are from the manufacturer's published product information.

Sources

Last updated:

Is the EOS Orbit right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote