+971 58 558 1295 ENTR Request a Quote
Wellis Venus
Wellis Venus, manufacturer product image 2
Wellis Venus, manufacturer product image 3
Wellis Venus, manufacturer product image 4
Wellis Venus, manufacturer product image 5

Photo: Wellis

Venus — hot tub

Wellis · Wellis Classic Series Hot Tubs

Short answer: Venus is a hot tub made by Wellis in Hungary. Sauna Dekor supplies and installs it in the homes and villas we build; the product and its certificates are the manufacturer's.

18 LED chromotherapy lights and the MyMusic 2.0 sound system.

Capacity
6 seats
Jets
49 jets
Seating layout
1 lounger + 5 seats
Dimensions
215 × 215 × 86 cm
Water volume
1,180 L
Weight
270 kg
Request a quote

Wellis Classic Series Hot Tubs

Model note

What the Venus is

The well-equipped body of the classic range: a 215 × 215 × 86 cm shell seating six — one lounger and five seats. It has 49 jets and two 2 HP massage pumps. On the lighting side there are 18 LED chromotherapy lights and the MyMusic 2.0 sound system; few bodies in the classic range carry that equipment. Water volume is 1,180 litres and the empty shell weighs 270 kg. Minimum supply is 1 × 25 A 230 V. The Scandinavian insulation package of the Life range is not included here; the classic range is positioned as the affordable entry point, with more moderate jet and pump counts.

Close alternatives we also supply and install: the Pluto (5 seats), the Jupiter (6 seats), the Saturn (6 seats). It belongs to the Wellis Classic Series Hot Tubs. The Wellis overview lists every range.

Technical specifications

Venus specifications

Capacity6 seats
Jets49 jets
Seating layout1 lounger + 5 seats
Dimensions215 × 215 × 86 cm
Water volume1,180 L
Weight270 kg
Massage pump2 × 2 HP
Power supply1 × 25A 230V — minimum
Product codeWM00555
Shell coloursMidnight Canyon / Grey, Sterling Silver / Grey, Ice White / Grey
Sound systemMyMusic™ 2.0 sound system
InsulationPolyfoam (1 cm)
Water filtrationWellisGuard™ ECO system
Lighting18 LED lights
ConnectionWIFI
Manufacturer warrantyShell structure 10 years · engineering parts 3 years

Values: Wellis's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Technology

What is inside the unit

Equipment differs between series; the headings below are Wellis's own systems.

01

LIFE Scandinavian insulation

Full-fill insulation between the body and the panels. Instead of running continuously, the heater switches on only as much as needed to hold the temperature; in winter the difference shows on the energy bill.

02

W-EC circulation pump

Energy-saving continuous circulation. The water does not stand still, so the filter and disinfectant work as intended.

03

WellisGuard water management

A water treatment package that combines the filter cartridge, ozone and UV in one system. It reduces chemical consumption.

04

SmartTouch control

Touch panel; temperature, filtration times and jet groups from one screen. A weekly programme can be set.

05

MyMusic 2.0 sound system

Bluetooth speakers built into the unit. No separate cabling or external device needed.

06

LED colour lighting

The underwater and rim lighting changes colour. In the evening, this is what sets the atmosphere.

07

Poli-Max shell reinforcement

Polyurethane reinforcement behind the acrylic shell. The shell carries the load and does not sag over time.

08

Smart-In Step

A 3 kW heat pump fits under the step. Running costs fall without taking up extra space.

Installation

Before installation

A hot tub is not just an appliance; it is a load on the structure. All four points are discussed at the site survey.

01

Structural load

A filled hot tub, with water and bathers, weighs three times its own weight. For large units such as the Olympus Life on a terrace or roof, a structural calculation is carried out; if the slab is not reinforced concrete, strengthening is needed. This check is done BEFORE installation.

02

Electrical

Plug & Play models run from a 230 V socket. All others need their own circuit, their own breaker and a residual current device; for models rated 32 A and above, a 400 V three-phase supply is recommended. The distance to the distribution board is asked at quotation stage.

03

Water and drainage

The fill line and drain point are planned close to the unit. In a built-in installation, at least one long side is left as a service hatch; otherwise the surrounding cladding has to be removed at the first fault.

04

Positioning

Large units are lowered by crane. The access route, door widths and manoeuvring space are measured at the site survey — this is the most common problem on site.

Frequently asked questions

Who manufactures the Venus?

Wellis, in Hungary. Sauna Dekor supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the Venus?

Yes. We supply and install the Venus as part of the homes and villas we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the Venus?

Capacity: 6 seats; Jets: 49 jets; Seating layout: 1 lounger + 5 seats; Dimensions: 215 × 215 × 86 cm. Values are from the manufacturer's published product information.

Sources

Is the Venus right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote