Wellis Pluto, manufacturer product image 2

Wellis Pluto, manufacturer product image 3

Wellis Pluto, manufacturer product image 4

Wellis Pluto, manufacturer product image 5

Photo: Wellis

Pluto — hot tub

Wellis · Wellis Classic Series Hot Tubs

Short answer: Pluto is a hot tub made by Wellis in Hungary. Sauna Dekor supplies and installs it in the homes and villas we build; the product and its certificates are the manufacturer's.

A 200 cm square body with two lying positions. At 956 litres the heating load is low.

Capacity: 5 seats
Jets: 42 jets
Seating layout: 2 loungers + 3 seats
Dimensions: 200 × 200 × 89 cm
Water volume: 956 L
Weight: 236 kg

Request a quote

Wellis Classic Series Hot Tubs

Model note

What the Pluto is

A square 200 × 200 × 89 cm body with a five-person layout: two loungers and three seats. 42 jets and one 3 HP massage pump. Water volume is 956 litres — one of the few bodies that stays under a thousand litres, which directly reduces the heating load and shortens the initial heat-up time. The empty shell weighs 236 kg. Minimum supply is 1 × 16 A 230 V, recommended 1 × 25 A 230 V. With two loungers it sets up a layout that leans towards rest; space per person is more generous than in the six-person bodies of the same size.

Close alternatives we also supply and install: the Jupiter (6 seats), the Saturn (6 seats), the Elba Deluxe (4 seats). It belongs to the Wellis Classic Series Hot Tubs. The Wellis overview lists every range.

Technical specifications

Pluto specifications

Capacity	5 seats
Jets	42 jets
Seating layout	2 loungers + 3 seats
Dimensions	200 × 200 × 89 cm
Water volume	956 L
Weight	236 kg
Massage pump	1 × 3 HP
Power supply	1 × 16A 230V — minimum · 1 × 25A 230V — recommended
Product code	WM00554
Shell colours	Midnight Canyon / Grey, Sterling Silver / Grey, Ice White / Grey
Sound system	MyMusic™ 2.0 sound system
Insulation	Polyfoam (1 cm)
Water filtration	WellisGuard™ ECO system
Connection	Plug & Play (optional)
Lighting	16 LED lights
Manufacturer warranty	Shell structure 10 years · engineering parts 3 years

Values: Wellis's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Technology

What is inside the unit

Equipment differs between series; the headings below are Wellis's own systems.

LIFE Scandinavian insulation

Full-fill insulation between the body and the panels. Instead of running continuously, the heater switches on only as much as needed to hold the temperature; in winter the difference shows on the energy bill.

W-EC circulation pump

Energy-saving continuous circulation. The water does not stand still, so the filter and disinfectant work as intended.

WellisGuard water management

A water treatment package that combines the filter cartridge, ozone and UV in one system. It reduces chemical consumption.

SmartTouch control

Touch panel; temperature, filtration times and jet groups from one screen. A weekly programme can be set.

MyMusic 2.0 sound system

Bluetooth speakers built into the unit. No separate cabling or external device needed.

LED colour lighting

The underwater and rim lighting changes colour. In the evening, this is what sets the atmosphere.

Poli-Max shell reinforcement

Polyurethane reinforcement behind the acrylic shell. The shell carries the load and does not sag over time.

Smart-In Step

A 3 kW heat pump fits under the step. Running costs fall without taking up extra space.

Installation

Before installation

A hot tub is not just an appliance; it is a load on the structure. All four points are discussed at the site survey.

Structural load

A filled hot tub, with water and bathers, weighs three times its own weight. For large units such as the Olympus Life on a terrace or roof, a structural calculation is carried out; if the slab is not reinforced concrete, strengthening is needed. This check is done BEFORE installation.

Electrical

Plug & Play models run from a 230 V socket. All others need their own circuit, their own breaker and a residual current device; for models rated 32 A and above, a 400 V three-phase supply is recommended. The distance to the distribution board is asked at quotation stage.

Water and drainage

The fill line and drain point are planned close to the unit. In a built-in installation, at least one long side is left as a service hatch; otherwise the surrounding cladding has to be removed at the first fault.

Positioning

Large units are lowered by crane. The access route, door widths and manoeuvring space are measured at the site survey — this is the most common problem on site.

Frequently asked questions

Who manufactures the Pluto?

Wellis, in Hungary. Sauna Dekor supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the Pluto?

Yes. We supply and install the Pluto as part of the homes and villas we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the Pluto?

Capacity: 5 seats; Jets: 42 jets; Seating layout: 2 loungers + 3 seats; Dimensions: 200 × 200 × 89 cm. Values are from the manufacturer's published product information.

Sources