Photo: Wellis

Sevilla P&P — hot tub

Wellis · Wellis Plug & Play Hot Tubs

Short answer: Sevilla P&P is a hot tub made by Wellis in Hungary. Sauna Dekor supplies and installs it in the homes and gardens we build; the product and its certificates are the manufacturer's.

The highest jet count among the plug-in shells.

Capacity: 6 seats
Jets: 46 jets

Request a quote

Wellis Plug & Play Hot Tubs

Model note

What the Sevilla P&P is

This has the highest jet count among the plug-in bodies: 46 jets. The six-person layout has one lounger and five seats. A single 3 HP massage pump and a 3 kW heater — stronger than the 2 kW heater on the rest of the P&P range. Water volume is 1,136 litres and the empty shell weighs 260 kg. Supply is a 13 A plug-and-play connection. Insulation is 2 cm polyfoam, the side panel is HorizontSide UV-resistant wood-textured plastic, and the control is a tamper-proof two-button panel. The body dimension on the manufacturer's page contains a typesetting error, so we confirm the size in the quotation.

Close alternatives we also supply and install: the Rio Grande W-Flow (6 seats), the Amazonas W-Flow Grand Prix (2 seats), the Amazonas W-Flow (2 seats). It belongs to the Wellis Plug & Play Hot Tubs. The Wellis overview lists every range.

Technical specifications

Sevilla P&P specifications

Capacity	6 seats
Jets	46 jets
Product code	WM00802
Insulation	Polyfoam (2 cm)
Water circulation	Energy-saving W-EC circulation pump
Water filtration	1 pc antibacterial filters
Control panel	2 buttons (Tamper proof)
Side cladding	HorizontSide™ UV-proof wood textured plastic
Shell colours	Midnight Canyon / Grey, Ice White / Grey
Connection	Plug & Play
Weight	260 kg
Dimensions	20 × 20 × 90 cm
Lighting	Central LED lighting, Illuminated controls
Options and extras	Smartphone™ app with WiFi, Thermo cover
Power supply	13 Amp (plug & play)
Heater	3 kW
Massage pump	1 pc 3 HP (230V/50Hz)
Frame	WPS
Water volume	1136 l
Seating	1 lounge seat / 5 sitting places
Manufacturer warranty	Shell structure 10 years · engineering parts 3 years

Values: Wellis's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Technology

What is inside the unit

Equipment differs between series; the headings below are Wellis's own systems.

LIFE Scandinavian insulation

Full-fill insulation between the body and the panels. Instead of running continuously, the heater switches on only as much as needed to hold the temperature; in winter the difference shows on the energy bill.

W-EC circulation pump

Energy-saving continuous circulation. The water does not stand still, so the filter and disinfectant work as intended.

WellisGuard water management

A water treatment package that combines the filter cartridge, ozone and UV in one system. It reduces chemical consumption.

SmartTouch control

Touch panel; temperature, filtration times and jet groups from one screen. A weekly programme can be set.

MyMusic 2.0 sound system

Bluetooth speakers built into the unit. No separate cabling or external device needed.

LED colour lighting

The underwater and rim lighting changes colour. In the evening, this is what sets the atmosphere.

Poli-Max shell reinforcement

Polyurethane reinforcement behind the acrylic shell. The shell carries the load and does not sag over time.

Smart-In Step

A 3 kW heat pump fits under the step. Running costs fall without taking up extra space.

Installation

Before installation

A hot tub is not just an appliance; it is a load on the structure. All four points are discussed at the site survey.

Structural load

A filled hot tub, with water and bathers, weighs three times its own weight. For large units such as the Olympus Life on a terrace or roof, a structural calculation is carried out; if the slab is not reinforced concrete, strengthening is needed. This check is done BEFORE installation.

Electrical

Plug & Play models run from a 230 V socket. All others need their own circuit, their own breaker and a residual current device; for models rated 32 A and above, a 400 V three-phase supply is recommended. The distance to the distribution board is asked at quotation stage.

Water and drainage

The fill line and drain point are planned close to the unit. In a built-in installation, at least one long side is left as a service hatch; otherwise the surrounding cladding has to be removed at the first fault.

Positioning

Large units are lowered by crane. The access route, door widths and manoeuvring space are measured at the site survey — this is the most common problem on site.

Frequently asked questions

Who manufactures the Sevilla P&P?

Wellis, in Hungary. Sauna Dekor supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the Sevilla P&P?

Yes. We supply and install the Sevilla P&P as part of the homes and gardens we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the Sevilla P&P?

Capacity: 6 seats; Jets: 46 jets. Values are from the manufacturer's published product information.

Sources