+971 58 558 1295 ENTR Request a Quote
Wellis Amazonas W-Flow
Wellis Amazonas W-Flow, manufacturer product image 2
Wellis Amazonas W-Flow, manufacturer product image 3
Wellis Amazonas W-Flow, manufacturer product image 4
Wellis Amazonas W-Flow, manufacturer product image 5

Manufacturer product image

Amazonas W-Flow — swim spa

Wellis

Short answer: Amazonas W-Flow is a swim spa made by Wellis in Hungary. Sauna Dekor supplies and installs it in the villas and hotels we build; the product and its certificates are the manufacturer's.

The standard counter-current version of the Amazonas shell.

Capacity
2 seats
Jets
26 jets
Request a quote

Model note

What the Amazonas W-Flow is

The standard counter-current version of the Amazonas body: a 550 × 235 × 147 cm shell with a swim section and two seats, and 26 jets. Two 3 HP massage pumps and a 3 kW heater. Water volume is 8,000 litres and the empty shell weighs 1,250 kg. Minimum supply is 1 × 35 A 230 V, with 1 × 60 A 230 V recommended. Insulation is 3.5 cm XPS and the control is SmartTouch. The side panel comes in two options: HorizontSide, or UV-resistant wood-textured plastic for a semi-recessed installation. Jet count and pump equipment are more restrained than on the Grand Prix version.

Technical specifications

Amazonas W-Flow specifications

Capacity2 seats
Jets26 jets
Product codeWU00027
Shell coloursSterling Silver / Grey, Ice White / Grey, Sterling Silver/ Brown
Sound systemAquasoul™ Pro 4.1 circle flat sound system
Insulation3.5 cm XPS
Water filtrationCrystal Clean System, WellisGuard™ system
Water circulationEnergy-saving W-EC circulation pump
Side claddingHorizontSide™ or semi-inground UV-proof wood textured plastic
Control panelSmartTouch
Weight1250 kg
Dimensions550 × 235 × 147 cm
LightingLED lights
Options and extrasSmartSalt System™ (optional), Smartphone™ app with WiFi
Power supply1 × 35A 230V/50Hz minimum, 1 × 60A 230V/50Hz optimum
Heater3 kW
Massage pump1 pc 3 HP (230V/50Hz), 1 pc 3 HP (230V/50Hz)
FrameStainless steel
Water volume8000 l
Seatingswim area / 2 sitting places
Waterfall and fountain jets2 × 3 pcs lighting laminar fountain jets
ConnectionWIFI
Manufacturer warrantyShell structure 10 years · engineering parts 3 years

Values: Wellis's published product information (read 23 October 2026). Dimensions, weights and supply figures not listed here are sent with the manufacturer's technical sheet.

Technology

What is inside the unit

Equipment differs between series; the headings below are Wellis's own systems.

01

LIFE Scandinavian insulation

Full-fill insulation between the body and the panels. Instead of running continuously, the heater switches on only as much as needed to hold the temperature; in winter the difference shows on the energy bill.

02

W-EC circulation pump

Energy-saving continuous circulation. The water does not stand still, so the filter and disinfectant work as intended.

03

WellisGuard water management

A water treatment package that combines the filter cartridge, ozone and UV in one system. It reduces chemical consumption.

04

SmartTouch control

Touch panel; temperature, filtration times and jet groups from one screen. A weekly programme can be set.

05

MyMusic 2.0 sound system

Bluetooth speakers built into the unit. No separate cabling or external device needed.

06

LED colour lighting

The underwater and rim lighting changes colour. In the evening, this is what sets the atmosphere.

07

Poli-Max shell reinforcement

Polyurethane reinforcement behind the acrylic shell. The shell carries the load and does not sag over time.

08

Smart-In Step

A 3 kW heat pump fits under the step. Running costs fall without taking up extra space.

Installation

Before installation

A hot tub is not just an appliance; it is a load on the structure. All four points are discussed at the site survey.

01

Structural load

A filled hot tub, with water and bathers, weighs three times its own weight. For large units such as the Olympus Life on a terrace or roof, a structural calculation is carried out; if the slab is not reinforced concrete, strengthening is needed. This check is done BEFORE installation.

02

Electrical

Plug & Play models run from a 230 V socket. All others need their own circuit, their own breaker and a residual current device; for models rated 32 A and above, a 400 V three-phase supply is recommended. The distance to the distribution board is asked at quotation stage.

03

Water and drainage

The fill line and drain point are planned close to the unit. In a built-in installation, at least one long side is left as a service hatch; otherwise the surrounding cladding has to be removed at the first fault.

04

Positioning

Large units are lowered by crane. The access route, door widths and manoeuvring space are measured at the site survey — this is the most common problem on site.

Features listed by the manufacturer

Close alternatives: the Amazonas Riverjet Life, the Danube W-Flow, the Danube W-Flow Grand Prix.

Frequently asked questions

Who manufactures the Amazonas W-Flow?

Wellis, in Hungary. Sauna Dekor supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the Amazonas W-Flow?

Yes. We supply and install the Amazonas W-Flow as part of the villas and hotels we design, manufacture and build, in the UAE, Saudi Arabia, Qatar and other markets.

What are the main specifications of the Amazonas W-Flow?

Capacity: 2 seats; Jets: 26 jets. Values are from the manufacturer's published product information.

Sources

Related pages

Is the Amazonas W-Flow right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote