Wellis Elba Deluxe, manufacturer product image 2

Wellis Elba Deluxe, manufacturer product image 3

Wellis Elba Deluxe, manufacturer product image 4

Wellis Elba Deluxe, manufacturer product image 5

Photo: Wellis

Elba Deluxe — hot tub

Wellis · Wellis Classic Series Hot Tubs

Short answer: Elba Deluxe is a hot tub made by Wellis in Hungary. Sauna Dekor supplies and installs it in the homes and villas we build; the product and its certificates are the manufacturer's.

A compact four-person body; it also appears in the swim spa list.

Capacity: 4 seats
Jets: 33 jets

Request a quote

Wellis Classic Series Hot Tubs

Model note

What the Elba Deluxe is

The Elba Deluxe is a compact swim spa shell: 396 × 220 × 120 cm. A swimming section at one end and four seats at the other; the jet count is 33. Three 3 HP massage pumps and a 3 kW heater. Water volume is 5,913 litres and the empty shell weighs 1,000 kg — filled, the load exceeds seven tonnes, so the ground preparation calls for a reinforced concrete platform. The recommended supply is 3 × 16 A 400 V. The side panel is a semi-sunken WibeSide cabinet, and the ARCTIC MAX gap-free insulation package is used. The control is the Easy7.

Close alternatives we also supply and install: the Porto (4 seats), the Cordoba (6 seats), the Valencia (7 seats). It belongs to the Wellis Classic Series Hot Tubs. The Wellis overview lists every range.

Technical specifications

Elba Deluxe specifications

Capacity	4 seats
Jets	33 jets
Product code	WU00049
Shell colours	Ice White / Grey
Insulation	ARCTIC MAX gap free
Water filtration	2 pcs Superfine filter cartridge
Side cladding	WibeSide™ cabinet – Semi-inground
Control panel	Easy7
Reinforcement	Fiberglass reinforcement
Water circulation	Energy-saving W-EC circulation pump
Weight	1000 kg
Dimensions	396 × 220 × 120 cm
Lighting	Central LED lighting
Options and extras	Thermo cover
Power supply	3 × 16A 400V/50Hz optimum
Heater	3 kW
Massage pump	3 pcs 3 HP (230V / 50Hz)
Frame	Stainless steel
Water volume	5913 l
Seating	swim area / 4 sitting places
Waterfall and fountain jets	3 pcs lighting flat fountain jets
Swim jets	2
Flat fountain jets	3
Manufacturer warranty	Shell structure 10 years · engineering parts 3 years

Values: Wellis's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Technology

What is inside the unit

Equipment differs between series; the headings below are Wellis's own systems.

LIFE Scandinavian insulation

Full-fill insulation between the body and the panels. Instead of running continuously, the heater switches on only as much as needed to hold the temperature; in winter the difference shows on the energy bill.

W-EC circulation pump

Energy-saving continuous circulation. The water does not stand still, so the filter and disinfectant work as intended.

WellisGuard water management

A water treatment package that combines the filter cartridge, ozone and UV in one system. It reduces chemical consumption.

SmartTouch control

Touch panel; temperature, filtration times and jet groups from one screen. A weekly programme can be set.

MyMusic 2.0 sound system

Bluetooth speakers built into the unit. No separate cabling or external device needed.

LED colour lighting

The underwater and rim lighting changes colour. In the evening, this is what sets the atmosphere.

Poli-Max shell reinforcement

Polyurethane reinforcement behind the acrylic shell. The shell carries the load and does not sag over time.

Smart-In Step

A 3 kW heat pump fits under the step. Running costs fall without taking up extra space.

Installation

Before installation

A hot tub is not just an appliance; it is a load on the structure. All four points are discussed at the site survey.

Structural load

A filled hot tub, with water and bathers, weighs three times its own weight. For large units such as the Olympus Life on a terrace or roof, a structural calculation is carried out; if the slab is not reinforced concrete, strengthening is needed. This check is done BEFORE installation.

Electrical

Plug & Play models run from a 230 V socket. All others need their own circuit, their own breaker and a residual current device; for models rated 32 A and above, a 400 V three-phase supply is recommended. The distance to the distribution board is asked at quotation stage.

Water and drainage

The fill line and drain point are planned close to the unit. In a built-in installation, at least one long side is left as a service hatch; otherwise the surrounding cladding has to be removed at the first fault.

Positioning

Large units are lowered by crane. The access route, door widths and manoeuvring space are measured at the site survey — this is the most common problem on site.

Frequently asked questions

Who manufactures the Elba Deluxe?

Wellis, in Hungary. Sauna Dekor supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the Elba Deluxe?

Yes. We supply and install the Elba Deluxe as part of the homes and villas we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the Elba Deluxe?

Capacity: 4 seats; Jets: 33 jets. Values are from the manufacturer's published product information.

Sources