+971 58 558 1295 ENTR Request a Quote
Wellis Valencia
Wellis Valencia, manufacturer product image 2
Wellis Valencia, manufacturer product image 3
Wellis Valencia, manufacturer product image 4

Photo: Wellis

Valencia — hot tub

Wellis · Wellis Classic Series Hot Tubs

Short answer: Valencia is a hot tub made by Wellis in Hungary. Sauna Dekor supplies and installs it in the homes and villas we build; the product and its certificates are the manufacturer's.

Classic seven-person shell; the highest capacity in the range.

Capacity
7 seats
Jets
48 jets
Request a quote

Wellis Classic Series Hot Tubs

Model note

What the Valencia is

The highest-capacity shell in the Classic range: seven seats in a 218 × 218 × 90 cm body, with no lounger. 48 jets, two 3 HP massage pumps and a 3 kW heater. Water volume is 1,136 litres and the empty shell weighs 330 kg — the same hydraulics and the same size as the Cordoba, the difference lying only in the seating layout and the jet count. Supply is 1 × 32 A 230 V minimum, 3 × 20 A 400 V recommended. Insulation is 2 cm polyfoam and the side panel is HorizontSide, a UV-resistant plastic with a timber texture. The control is the Easy7.

Close alternatives we also supply and install: the Dabassy Edge Select (2 seats), the Dabassy Edge Premier (5 seats), the Mars P&P (3 seats). It belongs to the Wellis Classic Series Hot Tubs. The Wellis overview lists every range.

Technical specifications

Valencia specifications

Valencia specifications
Capacity7 seats
Jets48 jets
Product codeWM00789
InsulationPolyfoam (2 cm)
Water circulationEnergy-saving W-EC circulation pump
Control panelEasy7
Control boxGecko (IN.YE-3)
Side claddingHorizontSide™ UV-proof wood textured plastic
Shell coloursMidnight Canyon / Grey, Ice White / Grey
Water filtration1 pc antibacterial filters
Weight330 kg
Dimensions218 × 218 × 90 cm
LightingCentral LED lighting, Illuminated controls
Options and extrasSmartphone™ app with WiFi, Thermo cover
Power supply1 × 32A 230V/50Hz minimum, 3 × 20A 400V/50Hz optimum
Heater3 kW
Massage pump2 x 3HP hydromassage
FrameWPS
Water volume1136 l
Seating7 sitting places
Manufacturer warrantyShell structure 10 years · engineering parts 3 years

Values: Wellis's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Technology

What is inside the unit

Equipment differs between series; the headings below are Wellis's own systems.

01

LIFE Scandinavian insulation

Full-fill insulation between the body and the panels. Instead of running continuously, the heater switches on only as much as needed to hold the temperature; in winter the difference shows on the energy bill.

02

W-EC circulation pump

Energy-saving continuous circulation. The water does not stand still, so the filter and disinfectant work as intended.

03

WellisGuard water management

A water treatment package that combines the filter cartridge, ozone and UV in one system. It reduces chemical consumption.

04

SmartTouch control

Touch panel; temperature, filtration times and jet groups from one screen. A weekly programme can be set.

05

MyMusic 2.0 sound system

Bluetooth speakers built into the unit. No separate cabling or external device needed.

06

LED colour lighting

The underwater and rim lighting changes colour. In the evening, this is what sets the atmosphere.

07

Poli-Max shell reinforcement

Polyurethane reinforcement behind the acrylic shell. The shell carries the load and does not sag over time.

08

Smart-In Step

A 3 kW heat pump fits under the step. Running costs fall without taking up extra space.

Installation

Before installation

A hot tub is not just an appliance; it is a load on the structure. All four points are discussed at the site survey.

01

Structural load

A filled hot tub, with water and bathers, weighs three times its own weight. For large units such as the Olympus Life on a terrace or roof, a structural calculation is carried out; if the slab is not reinforced concrete, strengthening is needed. This check is done BEFORE installation.

02

Electrical

Plug & Play models run from a 230 V socket. All others need their own circuit, their own breaker and a residual current device; for models rated 32 A and above, a 400 V three-phase supply is recommended. The distance to the distribution board is asked at quotation stage.

03

Water and drainage

The fill line and drain point are planned close to the unit. In a built-in installation, at least one long side is left as a service hatch; otherwise the surrounding cladding has to be removed at the first fault.

04

Positioning

Large units are lowered by crane. The access route, door widths and manoeuvring space are measured at the site survey — this is the most common problem on site.

Frequently asked questions

Who manufactures the Valencia?

Wellis, in Hungary. Sauna Dekor supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the Valencia?

Yes. We supply and install the Valencia as part of the homes and villas we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the Valencia?

Capacity: 7 seats; Jets: 48 jets. Values are from the manufacturer's published product information.

Sources

Last updated:

Is the Valencia right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote