Wellis Atlas Life, manufacturer product image 2

Wellis Atlas Life, manufacturer product image 3

Manufacturer product image

Atlas Life — hot tub

Wellis

Short answer: Atlas Life is a hot tub made by Wellis in Hungary. Sauna Dekor supplies and installs it in the villas and hotels we build; the product and its certificates are the manufacturer's.

A 215 cm shell; the six-person alternative when the 236 cm models do not fit.

Capacity: 6 seats
Jets: 43 jets
Seating layout: 1 lounger + 5 seats
Dimensions: 215 × 215 × 86,5 cm
Water volume: 1.100 L
Weight: 391 kg

Request a quote

Model note

What the Atlas Life is

The Atlas is for terraces where the 236 shells will not fit: the body is 215 × 215 × 86.5 cm and again seats six — one lounger and five seats. The smaller size shows on the jet and pump side: 43 jets, two 2 HP massage pumps and a 3 kW heater. Water volume is 1,100 litres and the empty shell weighs 391 kg, so both the heating load and the floor load are lower than on the larger shells. Supply is 1 × 16 A 230 V minimum — being able to run on a single-phase 16 amp supply means installing it without touching the existing electrical infrastructure; 3 × 16 A 400 V is recommended.

Technical specifications

Atlas Life specifications

Capacity	6 seats
Jets	43 jets
Seating layout	1 lounger + 5 seats
Dimensions	215 × 215 × 86,5 cm
Water volume	1.100 L
Weight	391 kg
Massage pump	2 × 2 HP
Heater	3 kW
Power supply	1 × 16A 230V — minimum · 3 × 16A 400V — recommended
Product code	WM00756
Shell colours	Midnight Canyon / Grey, Sterling Silver / Grey, Ice White / Grey
Side cladding	LightSide™ UV-proof wood textured plastic
Reinforcement	Poli-Max™ polyurethane
Insulation	LIFE Scandinavian insulation system
Water circulation	Energy-saving W-EC circulation pump
Control panel	SmartTouch
Water filtration	2 pcs MicroPlus filter cartridges, Crystal Clean System, In-Line WIS Pro, WellisGuard™ system
Sound system	AquaSoul™ Max 2.1 sound system
Lighting	Lighting Life jets
Options and extras	SmartSalt System™ (optional), Smartphone™ app with WiFi, Thermo cover
Smart-In Step system	Smart-In Step + 3 kW heat pump + LED lighting
Frame	WPS
Infinity jets	4
Waterfall and fountain jets	1 pc Lighting waterfall
Water diverter	WOW electronic water diverter
Connection	WIFI
Manufacturer warranty	Shell structure 10 years · engineering parts 3 years

Values: Wellis's published product information (read 23 October 2026). Dimensions, weights and supply figures not listed here are sent with the manufacturer's technical sheet.

Technology

What is inside the unit

Equipment differs between series; the headings below are Wellis's own systems.

LIFE Scandinavian insulation

Full-fill insulation between the body and the panels. Instead of running continuously, the heater switches on only as much as needed to hold the temperature; in winter the difference shows on the energy bill.

W-EC circulation pump

Energy-saving continuous circulation. The water does not stand still, so the filter and disinfectant work as intended.

WellisGuard water management

A water treatment package that combines the filter cartridge, ozone and UV in one system. It reduces chemical consumption.

SmartTouch control

Touch panel; temperature, filtration times and jet groups from one screen. A weekly programme can be set.

MyMusic 2.0 sound system

Bluetooth speakers built into the unit. No separate cabling or external device needed.

LED colour lighting

The underwater and rim lighting changes colour. In the evening, this is what sets the atmosphere.

Poli-Max shell reinforcement

Polyurethane reinforcement behind the acrylic shell. The shell carries the load and does not sag over time.

Smart-In Step

A 3 kW heat pump fits under the step. Running costs fall without taking up extra space.

Installation

Before installation

A hot tub is not just an appliance; it is a load on the structure. All four points are discussed at the site survey.

Structural load

A filled hot tub, with water and bathers, weighs three times its own weight. For large units such as the Olympus Life on a terrace or roof, a structural calculation is carried out; if the slab is not reinforced concrete, strengthening is needed. This check is done BEFORE installation.

Electrical

Plug & Play models run from a 230 V socket. All others need their own circuit, their own breaker and a residual current device; for models rated 32 A and above, a 400 V three-phase supply is recommended. The distance to the distribution board is asked at quotation stage.

Water and drainage

The fill line and drain point are planned close to the unit. In a built-in installation, at least one long side is left as a service hatch; otherwise the surrounding cladding has to be removed at the first fault.

Positioning

Large units are lowered by crane. The access route, door widths and manoeuvring space are measured at the site survey — this is the most common problem on site.

Features listed by the manufacturer

LIFE Scandinavian insulation
W-EC circulation pump
WellisGuard water management
SmartTouch control unit
MyMusic 2.0 sound system
LED chromotherapy
Poli-Max shell reinforcement
Smart-In Step

Close alternatives: the Atlas Life Essential, the Makalu Life, the Makalu Life Essential.

Frequently asked questions

Who manufactures the Atlas Life?

Wellis, in Hungary. Sauna Dekor supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the Atlas Life?

Yes. We supply and install the Atlas Life as part of the villas and hotels we design, manufacture and build, in the UAE, Saudi Arabia, Qatar and other markets.

What are the main specifications of the Atlas Life?

Capacity: 6 seats; Jets: 43 jets; Seating layout: 1 lounger + 5 seats; Dimensions: 215 × 215 × 86,5 cm. Values are from the manufacturer's published product information.

Sources