wedi Fundo Integro — manufacturer's product image

Photo: wedi

wedi Fundo Integro — flush-to-floor shower element

wedi

Short answer: wedi Fundo Integro is a flush-to-floor shower element made by wedi in Germany. Sauna Dekor specifies and installs it in the steam rooms, hammams and wet areas we build; the product and its certificates are the manufacturer's.

Size examples: 900 × 900 × 90 · 1,000 × 1,000 × 90 · 1,200 × 1,200 × 90 mm
Sizes listed: 9
Minimum installation height: 90 mm
Drain performance (DIN EN 1253-1): 48 l/min · 0.8 l/s
Slope connection piece: 1.5 %
Core: XPS extruded polystyrene rigid foam

Request a quote

Model note

What the wedi Fundo Integro is

Fundo Integro has the point drain and the slope integrated in a 90 mm element, so it goes straight onto the screed without a separate drain body.

Close alternatives we also specify and install: the wedi Fundo Ligno Plus (For suspended timber floors), the wedi Fundo Borgo (Quadrant corner element), the wedi Fundo Trollo (Round shower element). The tray range is summarised on the wedi Fundo shower tray page. The wedi overview lists every range.

Technical specifications

wedi Fundo Integro specifications

Size examples	900 × 900 × 90 · 1,000 × 1,000 × 90 · 1,200 × 1,200 × 90 mm
Sizes listed	9
Minimum installation height	90 mm
Drain performance (DIN EN 1253-1)	48 l/min · 0.8 l/s
Slope connection piece	1.5 %
Core	XPS extruded polystyrene rigid foam
Long-term compressive strength (50 years, ≤ 2 %)	0.08 N/mm²

Values: wedi's published product information (read 28 October 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Frequently asked questions

Who manufactures the wedi Fundo Integro?

wedi, in Germany. Sauna Dekor specifies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the wedi Fundo Integro?

Yes. We specify and install the wedi Fundo Integro as part of the steam rooms, hammams and wet areas we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the wedi Fundo Integro?

Size examples: 900 × 900 × 90 · 1,000 × 1,000 × 90 · 1,200 × 1,200 × 90 mm; Sizes listed: 9; Minimum installation height: 90 mm; Drain performance (DIN EN 1253-1): 48 l/min · 0.8 l/s. Values are from the manufacturer's published product information.

Sources

wedi

Close alternatives

wedi Fundo Ligno PlusFor suspended timber floors wedi Fundo BorgoQuadrant corner element wedi Fundo TrolloRound shower element

Is the wedi Fundo Integro right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Request a quote +971 58 558 1295