EOSafe sauna safety component, manufacturer product photo, manufacturer product image 1

Photo: EOS Saunatechnik

EOSafe — sauna safety component

EOS · EOS Sauna Safety Systems

Short answer: EOSafe is a sauna safety component made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the saunas we build; the product and its certificates are the manufacturer's.

cabin safety system; cuts the circuit on abnormal heating.

Category: Safety systems
Series: Classic series
Manufacturer: EOS Saunatechnik · Germany
Capacity: Selected by cabin volume

Request a quote

EOS Sauna Safety Systems

Model note

What the EOSafe is

EOSafe covers two different protections under one name. The L version watches the top of the heater with a light beam: a transmitter-receiver unit goes on the ceiling and a 27 or 52 mm reflector above the heater; if the beam is broken — by a falling towel, for example — the system cuts in. The Universal version uses a 34 × 52 mm glass reflector and can be positioned almost freely above the heater, so it suits different bodies. The D version watches the door: an RFID unit is fitted to glass doors, 5 m or 20 m of cable and an authorisation chip come with the set, and unauthorised opening is detected. The two can be combined on a single central control unit. Supply 230 V, connection over S-Bus; compatible with the Econ D4/H4, Compact, EmoTec, EmoStyle and EmoTouch 3 ranges.

Close alternatives we also supply and install: the EOS Heater guard rail (Safety systems), the EOS Emergency button (Safety systems), the EOS Door contact (Safety systems). It belongs to the EOS Sauna Safety Systems. The EOS overview lists every range.

Technical specifications

EOSafe specifications

Category	Safety systems
Series	Classic series
Manufacturer	EOS Saunatechnik · Germany
Capacity	Selected by cabin volume
Compatible control units	EOS Econ 4 series · EOS Compact DP/HP series · EOS Compact DC/HC series · EOS Compact D18/H18 series · EOS EmoTec series · EOS EmoStyle series · EOS EmoStyle Hi series · EOS EmoTouch 3

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOSafe?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOSafe?

Yes. We size, supply and install the EOSafe as part of the saunas we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOSafe?

Category: Safety systems; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

EOS Sauna Safety Systems

Close alternatives

EOS Heater guard railSafety systems EOS Emergency buttonSafety systems EOS Door contactSafety systems

Is the EOSafe right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Request a quote +971 58 558 1295

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated: 29 October 2026