+971 58 558 1295 ENTR Request a Quote
EOS Water softening system — manufacturer's product shot 1

Photo: EOS Saunatechnik

EOS Water softening system — steam room component

EOS · EOS steam room equipment

Short answer: EOS Water softening system is a steam room component made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the steam rooms we build; the product and its certificates are the manufacturer's.

The equipment that decides generator life in hard water.

Category
Steam room equipment
Series
Classic series
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Request a quote

EOS steam room equipment

Model note

What the EOS Water softening system is

In hard water, water softening determines the life of the generator. There are two bodies: the AKE40 gives 2,400 litres per hour and the AKE120 3,000 litres per hour; the salt tanks hold 40 and 80 kg. The AKE40 is for 1–6 users, the AKE120 for 8–20. Dimensions are 670 × 320 × 520 mm and 1,250 × 320 × 520 mm; the supply is 230 V, protection class IP22 and operating pressure 2.0–6.0 bar. Water hardness is set on the electronic control. Regeneration takes 35 minutes and is factory-set for 02.00 at night, so that soft water is uninterrupted during the day. During regeneration an automatic bypass routes the water around the system. Salt consumption is 2.4 kg on the AKE40 and 7.2 kg on the AKE120.

Close alternatives we also supply and install: the EOS Exhaust fan (Steam room equipment), the EOS Blower fan (Steam room equipment), the EOS Disc vent (Steam room equipment). It belongs to the EOS steam room equipment. The EOS overview lists every range.

Technical specifications

EOS Water softening system specifications

CategorySteam room equipment
SeriesClassic series
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume
Connection230 V 1N ~
Dimensions HWDAKE40: 670 x 320 x 520 mm AKE120: 1250 x 320 x 520 mm
Protection classIP22

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS Water softening system?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS Water softening system?

Yes. We size, supply and install the EOS Water softening system as part of the steam rooms we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS Water softening system?

Category: Steam room equipment; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

Is the EOS Water softening system right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote