+971 58 558 1295 ENTR Request a Quote
EOS disc vent — manufacturer's product shot 1
EOS disc vent — manufacturer's product shot 1, manufacturer product image 2
EOS disc vent — manufacturer's product shot 1, manufacturer product image 3

Photo: EOS Saunatechnik

EOS Disc vent — steam room component

EOS · EOS steam room equipment

Short answer: EOS Disc vent is a steam room component made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the steam rooms we build; the product and its certificates are the manufacturer's.

Adjustable air vent.

Category
Steam room equipment
Series
Classic series
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Request a quote

EOS steam room equipment

Model note

What the EOS Disc vent is

The disc valve is used at the outlet where the extract fan connects, to prevent backflow. Turning the disc adjusts the opening, so on site we can balance which of two spaces on the same duct run draws more. It is available in plastic or stainless steel — in wet areas and on mosaic finishes the stainless version is preferred, as it leaves no staining on the surface over time. We position the valve in the furthest corner of the ceiling, so that the steam makes a full circuit of the room. The manufacturer lists the product under number 20014404. Because the valve is recessed into the finish, the cut-out position and the pipe centre are set together with the mosaic joint layout; a hole opened afterwards breaks the joint pattern. For cleaning, turning the disc and removing it is enough.

Close alternatives we also supply and install: the EOS Mini (3 kW), the EOS M3 (3 kW), the EOS Thermat (4.5 kW · 6 kW · 7.5 kW · 9 kW). It belongs to the EOS steam room equipment. The EOS overview lists every range.

Technical specifications

EOS Disc vent specifications

EOS Disc vent specifications
CategorySteam room equipment
SeriesClassic series
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS Disc vent?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS Disc vent?

Yes. We size, supply and install the EOS Disc vent as part of the steam rooms we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS Disc vent?

Category: Steam room equipment; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

Last updated:

Is the EOS Disc vent right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote