+971 58 558 1295 ENTR Request a Quote
EOS Vitae+ infrared cabin component, manufacturer product photo, manufacturer product image 1

Photo: EOS Saunatechnik

EOS Vitae+ — infrared cabin component

EOS · EOS Infrared Systems for Cabins

Short answer: EOS Vitae+ is an infrared cabin component made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the infrared cabins we build; the product and its certificates are the manufacturer's.

The high-output version of the Vitae range.

Category
Infrared systems
Series
Classic series
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Request a quote

EOS Infrared Systems for Cabins

Model note

What the EOS Vitae+ is

Vitae+ adds a built-in dimmer to the Vitae body: the emitter intensity is adjusted on the heater itself, without leaving the cabin. The emitter is again quartz glass, outputs are 350, 500 and 750 W, the spectrum is full range — IR-A, IR-B and IR-C — and it reaches full output in under a second. The 500 and 750 W versions carry an inrush current limiter inside. The dimmer makes the body larger: 990 × 185 × 65 mm, with the Compact version at 815 × 185 × 65 mm; the installation cut-outs are 165 × 980 and 165 × 805 mm. Weight is 2.8 kg, or 2.5 kg for the Compact version. A stainless steel body, polished aluminium reflector, black flocked grille and 3 m silicone cable are standard. It recesses into a wall panel or into a 90° corner.

Close alternatives we also supply and install: the EOS Vitae Protect (Infrared systems), the EOS Vitae Protect+ (Infrared systems), the EOS Vitae Protect Top (Infrared systems). It belongs to the EOS Infrared Systems for Cabins. The EOS overview lists every range.

Technical specifications

EOS Vitae+ specifications

CategoryInfrared systems
SeriesClassic series
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume
Power supply230 V 1N ~ 50 Hz
IR emitterQuarz glass
Spectrum0.8 – 10 μm IR-A IR-B IR-C
Dimensions H/W/D, in cm990 x 185 x 65 mm 815 x 185 x 65 mm (Compact)
Cut-out for mounting165 x 980 mm 165 x 805 mm (Compact)
Weight without packaging2.8 kg / 2.5 kg (Compact)

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS Vitae+?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS Vitae+?

Yes. We size, supply and install the EOS Vitae+ as part of the infrared cabins we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS Vitae+?

Category: Infrared systems; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

Is the EOS Vitae+ right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

WhatsApp Call now