+971 58 558 1295 ENTR Request a Quote
EOS InfraSteam — manufacturer's product shot 1

Photo: EOS Saunatechnik

EOS InfraSteam — infrared cabin component

EOS · EOS Infrared Systems for Cabins

Short answer: EOS InfraSteam is an infrared cabin component made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the infrared cabins we build; the product and its certificates are the manufacturer's.

Unit that adds humidity to an infrared cabin.

Category
Infrared systems
Series
Classic series
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Request a quote

EOS Infrared Systems for Cabins

Model note

What the EOS InfraSteam is

InfraSteam is a slim unit that adds humidity to an infrared cabin: the 52 × 22.5 × 12 cm body hangs on the wall with its controls built in. Output is 750 W and the stainless water tank holds about 1.5 litres and is filled by hand — filling is done beneath the removable essence cup. Dry-running protection sounds an alarm when the water runs out. Steam output is infinitely adjustable and there is electronic time control. It covers infrared cabins up to about 5 m³. The body is anthracite pearl effect, the supply 230 V, the weight 5.6 kg, and it comes with a plug. It can also be retrofitted to existing cabins. Because the tank is filled by hand, we leave access space in front of the unit; no bench or backrest may block it.

Close alternatives we also supply and install: the EOS Dimmer unit (Infrared systems), the EOS Foil sensor (Infrared systems), the EOS LED Spot (Colour lighting). It belongs to the EOS Infrared Systems for Cabins. The EOS overview lists every range.

Technical specifications

EOS InfraSteam specifications

CategoryInfrared systems
SeriesClassic series
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume
Power supply230 V 1N ~ 50 Hz
Power rating acc. DIN750 W
Housing colouranthracite pearl effect
Water tank, Water tank volumeapprox. 1.5 l
Dimension in cm, H/W/D52 / 22.5 / 12
IR cabin sizebis ca. 5 m³
Gewicht ohne Verpackung5.6 kg

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS InfraSteam?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS InfraSteam?

Yes. We size, supply and install the EOS InfraSteam as part of the infrared cabins we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS InfraSteam?

Category: Infrared systems; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

Is the EOS InfraSteam right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote