Photo: EOS Saunatechnik

EOS Dimmer unit — infrared cabin component

EOS · EOS Infrared Systems for Cabins

Short answer: EOS Dimmer unit is an infrared cabin component made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the infrared cabins we build; the product and its certificates are the manufacturer's.

A unit that adjusts emitter output in steps.

Category: Infrared systems
Series: Classic series
Manufacturer: EOS Saunatechnik · Germany
Capacity: Selected by cabin volume

Request a quote

EOS Infrared Systems for Cabins

Model note

What the EOS Dimmer unit is

The dimmer unit lets the user adjust emitter intensity without leaving the cabin; it is made specifically for Vitae quartz glass emitters. It is flush-mounted: the wall cut-out is Ø 67 mm, installation depth 50 mm, housing 80 × 80 × 55 mm, and the finish is matt black. Switching capacity is up to 1,000 W — so it drives a single 750 W emitter comfortably. The installation condition the manufacturer sets matters: at least 50 cm clearance must be left to the emitter. It is used where a full control panel inside the cabin is not wanted and intensity adjustment alone is enough. If more than one emitter is to be dimmed, a separate unit is planned for each; they are not wired in parallel to one dimmer.

Close alternatives we also supply and install: the EOS Foil sensor (Infrared systems), the EOS LED Spot (Colour lighting), the EOS LED Spot Compact (Colour lighting). It belongs to the EOS Infrared Systems for Cabins. The EOS overview lists every range.

Technical specifications

EOS Dimmer unit specifications

Category	Infrared systems
Series	Classic series
Manufacturer	EOS Saunatechnik · Germany
Capacity	Selected by cabin volume
Dimensions H/W/D	80 x 80 x 55 mm
Installation depth	50 mm
Wall cut-out	Ø 67 mm
Minimal gap to IR heater	50 cm
Max. dimmable power	1000 W

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS Dimmer unit?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS Dimmer unit?

Yes. We size, supply and install the EOS Dimmer unit as part of the infrared cabins we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS Dimmer unit?

Category: Infrared systems; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

EOS Infrared Systems for Cabins

Close alternatives

EOS Foil sensorInfrared systems EOS LED SpotColour lighting EOS LED Spot CompactColour lighting

Is the EOS Dimmer unit right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Request a quote +971 58 558 1295

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated: 29 October 2026