+971 58 558 1295 ENTR Request a Quote
Condair Omega — Resistive steam generator
Condair Omega — Resistive steam generator, manufacturer product image 2
Condair Omega — Resistive steam generator, manufacturer product image 3
Condair Omega — Resistive steam generator, manufacturer product image 4
Condair Omega — Resistive steam generator, manufacturer product image 5

Manufacturer product image

Condair Omega — resistive steam generator

Condair

Short answer: Condair Omega is a resistive steam generator made by Condair Group in Switzerland. Sauna Dekor sizes, supplies, installs and commissions it in the steam rooms we build; the product and its certificates are the manufacturer's.

The Omega produces steam quickly whatever the water quality: steam arrives in under four minutes from a cold start, and the keep-warm function holds it ready at all times. It comes in two compact sizes. With the optional integrated spa control it can run a steam room and a sauna at the same time, independently of one another.

Type
Resistive
Capacity
2–20 kg/hour
Shell
Two compact sizes
Steam duration
From room temperature in under 4 minutes
Control unit
Integrated spa control (optional)
Request a quote

Model note

What the Condair Omega is

Omega is the compact one among the resistive generators: it gives 2 to 20 kg of steam per hour and comes in two body lengths. Starting from room temperature it produces steam in under four minutes; with the keep-warm function on, steam stands ready instantly. It works regardless of water quality, and servicing takes a few minutes. The auto-sensitive control raises and lowers steam output to hold the temperature entered, without the user noticing. With the optional integrated spa control, caldarium, rasul, bio sauna and Finnish sauna programmes can be run, and the steam room and sauna are managed at the same time, independently of each other. The manufacturer positions this unit for steam showers and for residential and semi-professional steam rooms.

Technical specifications

Condair Omega specifications

TypeResistive
Capacity2–20 kg/hour
ShellTwo compact sizes
Steam durationFrom room temperature in under 4 minutes
Control unitIntegrated spa control (optional)

Values: Condair Group's published product information (read 23 October 2026). Dimensions, weights and supply figures not listed here are sent with the manufacturer's technical sheet.

Installation

How the system is installed

Click the points: six components, from the generator to the exhaust, and where each one goes.

Steam room installation diagram
Filter cartridgeFeed water passes through a filter before it enters the generator.
Steam generatorThe unit shown is a Condair Omega large.
Fragrance containerA fragrance dosing pump adds scent to the steam.
Steam inletSteam enters the cabin close to the floor, away from the seating.
Spa displayTemperature, lighting and fragrance are controlled from inside the cabin.
Steam outletAn exhaust duct removes the humid air; there is no return air.

Features listed by the manufacturer

Close alternatives: the Condair Sigma, the Nordmann AT4D, the Condair Delta Spa.

Frequently asked questions

Who manufactures the Condair Omega?

Condair Group, in Switzerland. Sauna Dekor sizes, supplies, installs and commissions it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the Condair Omega?

Yes. We size, supply, install and commission the Condair Omega as part of the steam rooms we design, manufacture and build, in the UAE, Saudi Arabia, Qatar and other markets.

What are the main specifications of the Condair Omega?

Type: Resistive; Capacity: 2–20 kg/hour; Shell: Two compact sizes; Steam duration: From room temperature in under 4 minutes. Values are from the manufacturer's published product information.

Sources

Related pages

Is the Condair Omega right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote