wedi Fundo Top — point drainRequest a quote

wedi Fundo Top — point drain — Shower tray design surface

wedi Fundo Top — point drain — Shower tray design surface, manufacturer product image 2

Photo: wedi

wedi Fundo Top — point drain — shower tray design surface

wedi

Short answer: wedi Fundo Top — point drain is a shower tray design surface made by wedi in Germany. Sauna Dekor specifies and installs it in the rooms we build; the product and its certificates are the manufacturer's.

A ready surface for trays with a point drain. One piece, jointless, with a non-slip surface. You order it, cut it down on site if needed and set it on the tray — the floor is finished.

Compatible trays: Fundo Primo · Fundo Ligno · Fundo Plano · Fundo Integro
Drain: Point
Appearance: Natural stone · single colour · marble
Length: 800 · 900 · 914 · 1,000 · 1,020 mm

Request a quote

Model note

What the wedi Fundo Top — point drain is

A ready-made surface for Fundo trays with a point drain — compatible with Primo, Ligno, Plano and Integro. Same material and same five sizes as the linear version: 800, 900, 914, 1,000 and 1,020 mm; three appearance families and twelve colours. The difference is in the drainage geometry: because the water collects at a single point, the fall runs to the centre from four directions, which is easier to resolve in narrow and square shower layouts. The surface is jointless, antibacterial and non-slip when wet. It can be cut down on site, so it can also be used where the standard sizes do not suit the layout. The material is coloured all the way through, so a trimmed edge does not show a different tone; and unlike ceramic grout, the maintenance-free surface needs no scrubbing.

Close alternatives we also specify and install: the wedi I-Board Top (Mineral and vinyl composite), the wedi Sanbath Flex washbasin (1,200 × 500 × 120 mm), the wedi Sanbath washbasin (500–1,300 × 500 × 120 mm). The wedi overview lists every range.

Technical specifications

wedi Fundo Top — point drain specifications

Compatible trays	Fundo Primo · Fundo Ligno · Fundo Plano · Fundo Integro
Drain	Point
Appearance	Natural stone · single colour · marble
Length	800 · 900 · 914 · 1,000 · 1,020 mm

Values: wedi's published product information (read September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Frequently asked questions

Who manufactures the wedi Fundo Top — point drain?

wedi, in Germany. Sauna Dekor specifies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the wedi Fundo Top — point drain?

Yes. We specify and install the wedi Fundo Top — point drain as part of the rooms we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the wedi Fundo Top — point drain?

Compatible trays: Fundo Primo · Fundo Ligno · Fundo Plano · Fundo Integro; Drain: Point; Appearance: Natural stone · single colour · marble; Length: 800 · 900 · 914 · 1,000 · 1,020 mm. Values are from the manufacturer's published product information.

Sources

wedi

Close alternatives

wedi I-Board TopMineral and vinyl composite wedi Sanbath Flex washbasin1,200 × 500 × 120 mm wedi Sanbath washbasin500–1,300 × 500 × 120 mm

Is the wedi Fundo Top — point drain right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Request a quote +971 58 558 1295

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated: 29 October 2026