+971 58 558 1295 ENTR Request a Quote
EOS Pipe sauna heater, manufacturer product photo, manufacturer product image 1
EOS Pipe sauna heater, manufacturer product photo, manufacturer product image 2
EOS Pipe sauna heater, manufacturer product photo, manufacturer product image 3
EOS Pipe sauna heater, manufacturer product photo, manufacturer product image 4

Photo: EOS Saunatechnik

EOS Pipe — sauna heater

EOS · EOS Sauna Heaters

Short answer: EOS Pipe is a sauna heater made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the saunas we build; the product and its certificates are the manufacturer's.

Compact and powerful; for small cabins up to 4.5 m³.

Category
Sauna heaters
Series
Design series
Power options
3 kW · 3.5 kW
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Request a quote

EOS Sauna Heaters

Model note

What the EOS Pipe is

The body of the Pipe is laser-cut from solid stainless steel tube with a 4 mm wall; because the cut is a free-form ellipse, the heater shows a different geometry from every angle. Only 2 cm of clearance to the wall is needed, and it can also be installed in a corner — the corner bracket is in the box. It measures Ø 20 × 80 cm, or 25 cm deep with the wall brackets. It takes about 10 kg of stones, and a 10 kg diabase stone set is supplied with the unit. The 3 kW and 3.5 kW outputs cover cabins of 3–4.5 m³. The finish is matt black, anthracite pearl effect or the reddish-brown "Rust Marble". The Control version plugs into an RCD-protected 230 V socket outside the sauna; temperature and time are set from the two aluminium knobs on the front.

Close alternatives we also supply and install: the EOS Majesty (6 kW · 8 kW · 10 kW), the EOS Structure (6 kW · 8 kW · 10 kW · 12 kW), the EOS Future / Vision (10 kW · 12 kW · 15 kW). It belongs to the EOS Sauna Heaters. The EOS overview lists every range.

Technical specifications

EOS Pipe specifications

EOS Pipe specifications
CategorySauna heaters
SeriesDesign series
Power options3 kW · 3.5 kW
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume
Electrical connection230 V N ~
Dimensions Ø H x W (with wall-mounting brackets)Ø 20 x 80 x 25 (without rail)
For sauna cabin size (3 / 3,5 kW)3 – 4.5 m³
M in. size air inlet and outlet20 x 4 cm
Weight without stonesapprox. 25.5 kg
Stone filling~10 kg
Power extensionNo
Compatible control unitsEOS Econ 4 series · EOS Compact DC/HC series · EOS Compact D18/H18 series · EOS EmoStyle series · EOS EmoStyle Hi series · EOS U-Command · EOS EmoTouch 3

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Selection

How we find the right capacity

We work out the capacity from the cabin volume; the five steps below are done together at the quotation stage.

01

Start with the cabin volume

Basic rule: cabin volume (m³) × 1 kW. A 2 × 2 × 2.10 m cabin is 8.4 m³ and needs about 9 kW. This figure is a starting point, not the answer.

02

Add glass and uninsulated surfaces

By Harvia's rule, each m² of glass front adds 1.2 m³ to the volume, and each m² of uninsulated concrete or stone adds about 1.2 m³. In a cabin with a full glass front, the real requirement is thirty to forty per cent above the bare volume.

03

Agree the power supply early

Above 9 kW a 400 V three-phase supply is required; for lower outputs the phase is chosen according to the heater's installation manual. The heater is fed on its own circuit, with its own fuse and residual current device.

04

State the usage intensity

A home cabin used two hours a day and a hotel cabin open for ten hours cannot use the same unit. For commercial use, heavy-duty (HD) units and a larger stone mass are chosen.

05

Choose the control together with the heater

The power a control unit can switch directly is limited; above that, a PEB power boost unit is needed. This is calculated at the quotation stage.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS Pipe?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS Pipe?

Yes. We size, supply and install the EOS Pipe as part of the saunas we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS Pipe?

Category: Sauna heaters; Series: Design series; Power options: 3 kW · 3.5 kW; Manufacturer: EOS Saunatechnik · Germany. Values are from the manufacturer's published product information.

Sources

Last updated:

Is the EOS Pipe right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote