+971 58 558 1295 ENTR Request a Quote
EOS IR heating foil infrared cabin component, manufacturer product photo, manufacturer product image 1

Photo: EOS Saunatechnik

EOS IR heating foil — infrared cabin component

EOS · EOS Infrared Systems for Cabins

Short answer: EOS IR heating foil is an infrared cabin component made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the infrared cabins we build; the product and its certificates are the manufacturer's.

Heating foil spread over the surface; under the bench and behind the backrest.

Category
Infrared systems
Series
Classic series
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Request a quote

EOS Infrared Systems for Cabins

Model note

What the EOS IR heating foil is

Heating foil hides behind the timber lining; no appliance is visible in the cabin and the heat comes from a large surface. It works in the long-wave IR-C range, with an operating temperature of about 100 °C and a thermostatic limiter bonded to the surface that cuts out at 110 °C. The foil contains no heavy metals and is thin and flexible. There are six sizes: from a 600 × 300 mm piece at 90 W up to 1,700 × 800 mm at 650 W. On every foil the heated area is smaller than the body — 1,620 × 720 mm on the 650 W foil. The manufacturer notes that effective output may come out 5% above or 10% below the nominal value. A 3 m silicone cable comes fitted.

Close alternatives we also supply and install: the EOS InfraStyle i (Infrared systems), the EOS InfraStyle (Infrared systems), the EOS InfraTec Premium (Infrared systems). It belongs to the EOS Infrared Systems for Cabins. The EOS overview lists every range.

Technical specifications

EOS IR heating foil specifications

EOS IR heating foil specifications
CategoryInfrared systems
SeriesClassic series
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS IR heating foil?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS IR heating foil?

Yes. We size, supply and install the EOS IR heating foil as part of the infrared cabins we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS IR heating foil?

Category: Infrared systems; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

Last updated:

Is the EOS IR heating foil right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

Talk to our team

Dubai office · Istanbul factory

WhatsApp+90 532 215 64 78Call Dubai+971 58 558 1295Request a quote