+971 58 558 1295 ENTR Request a Quote
EOS Econ S2 — manufacturer's product shot 1
EOS Econ S2 — manufacturer's product shot 1, manufacturer product image 2

Photo: EOS Saunatechnik

EOS Econ S2 — steam room component

EOS · EOS steam room equipment

Short answer: EOS Econ S2 is a steam room component made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the steam rooms we build; the product and its certificates are the manufacturer's.

Steam generator control unit.

Category
Steam room equipment
Series
Classic series
Manufacturer
EOS Saunatechnik · Germany
Capacity
Selected by cabin volume
Request a quote

EOS steam room equipment

Model note

What the EOS Econ S2 is

Econ S2 is an external control that drives the steam generator; it is used together with SteamRock II Basic. Temperature is set between 30 °C and 50 °C, with hysteresis set in a 1–5 K band — these two values are what really determine comfort in a steam room. Heating time is 6 hours, 12 hours or unlimited. Essence dosing is managed directly from this panel: intensity in 15 steps, interval set separately, and a 230 V dosing pump connects to the panel, so no separate dosing control unit is needed. Light and extract fan outputs are 230 V. It reports faults and errors from the generator on the display. It is wall-mounted, with a 22 × 25 × 6.7 cm housing. The temperature sensor comes with 5 m of cable.

Close alternatives we also supply and install: the EOS Steam nozzle (Steam room equipment), the EOS Dosing pump (Steam room equipment), the EOS Essence reservoir (Steam room equipment). It belongs to the EOS steam room equipment. The EOS overview lists every range.

Technical specifications

EOS Econ S2 specifications

CategorySteam room equipment
SeriesClassic series
ManufacturerEOS Saunatechnik · Germany
CapacitySelected by cabin volume
Electrical connection230 V 1N ~ 50Hz
Temperature control range30 – 50 °C
Start time pre-selection / timer24 h timer or recurring automatic
Cabin light output230 V, max. 100 W
Fan output230 V, cabin dry function
Essence dosing controlintensity (15 steps) and intervals
Heating time limitation6 h, 12 h, unlimited
Dimensions H/W/D, in cm22 / 25 / 6.7
Ambient temperature in operation-10 to +40 °C
Weight without packaging1.0 kg

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

01

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

02

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

03

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

04

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

05

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

06

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS Econ S2?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS Econ S2?

Yes. We size, supply and install the EOS Econ S2 as part of the steam rooms we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS Econ S2?

Category: Steam room equipment; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

Is the EOS Econ S2 right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated:

Ready to learn more?

Book a consultation or speak with our team.

We’d love to cooperate
TO BUILD AMAZING POOLSAUNATURKISH BATH & HAMMAMSNOW ROOMSTEAM ROOMSALT ROOMWHIRLPOOL

Sauna Dekor Spa Solutions

Sauna Dekor Spa Solutions was established in 1987. In order to spread the use of Spa & Wellness, it introduced its products in many international fairs and followed the innovations abroad and examined the Spa & Wellness culture on-site, and made perfect applications with quality materials and correct manufacturing techniques.

WhatsApp Call now