EOS E-Cool Wall BRequest a quote

EOS E-Cool Wall B ice machine, manufacturer product photo, manufacturer product image 1

EOS E-Cool Wall B ice machine, manufacturer product photo, manufacturer product image 2

EOS E-Cool Wall B ice machine, manufacturer product photo, manufacturer product image 3

EOS E-Cool Wall B ice machine, manufacturer product photo, manufacturer product image 4

EOS E-Cool Wall B ice machine, manufacturer product photo, manufacturer product image 5

Photo: EOS Saunatechnik

EOS E-Cool Wall B — ice machine

Q: Who manufactures the EOS E-Cool Wall B?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Q: Does Sauna Dekor install the EOS E-Cool Wall B?

Yes. We size, supply and install the EOS E-Cool Wall B as part of the spa cold areas we design, manufacture and build, in the Gulf and our other markets.

Q: What are the main specifications of the EOS E-Cool Wall B?

Category: Ice machines; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

EOS · EOS E-Cool Ice Machines

Short answer: EOS E-Cool Wall B is an ice machine made by EOS Saunatechnik in Germany. Sauna Dekor sizes, supplies and installs it in the spa cold areas we build; the product and its certificates are the manufacturer's.

Built-in machine with bottom ice delivery.

Category: Ice machines
Series: Classic series
Manufacturer: EOS Saunatechnik · Germany
Capacity: Selected by cabin volume

Request a quote

EOS E-Cool Ice Machines

Model note

What the EOS E-Cool Wall B is

The E-Cool Wall B discharges its ice at the bottom; the machine sits directly above the ice bowl, in the ceiling void or inside a suspended ceiling, and the ice drops straight down. The chute is short, so the ice does not melt on the way. Capacity is up to 200 kg of flake ice per day, with an average residual moisture of about 25%. The casing is anthracite pearl-effect painted metal, 560 × 530 × 525 mm, dry weight 52 kg. Supply 230 V, consumption 580 W, water cooling and R 290 refrigerant. There are two 3/4″ water inlets, two separate drains and a 21 mm drain diameter; water consumption is 59 litres per hour. The operating environment is +10 °C to +43 °C, and noise during production stays below 40 dB.

Close alternatives we also supply and install: the EOS E-Cool Wall BE (Ice machines), the EOS LSG Sauna module (Accessories and modules), the EOS LSG Hammam module (Accessories and modules). It belongs to the EOS E-Cool Ice Machines. The EOS overview lists every range.

Technical specifications

EOS E-Cool Wall B specifications

Category	Ice machines
Series	Classic series
Manufacturer	EOS Saunatechnik · Germany
Capacity	Selected by cabin volume
Ice production capacity per day (24 h)	200 kg
Ice type	Flake ice
Average rest humidity	approx. 25 %
Dry weight	52 kg
Power supply	230 V 1N 50 Hz
Power consumption	580 W
Housing	Painted metal
Cooling method	Water based
Cooling agent	R 290
Size W x D x H in mm	560 x 530 x 525
Installation	concealed
Power on/off switch	No
Water supply connection	3/4"
Water drain Ø	21 mm
Water consumption l/h (ambient temperature dependant)	59 l/h
Ambient temperature range	+10 °C bis +43 °C
Volume (during ice production)	< 40 db

Values: EOS Saunatechnik's published product information (read 15 September 2026). Figures not listed here are sent with the manufacturer's technical sheet.

Why EOS

Five series, one ecosystem

The logic you set up in a home works in a hotel too.

Five series, one control family

The same control family runs from the Standard series up to the large commercial series. The logic you set up in a home works in a hotel too.

Modular control

Sauna, hammam, steam and infrared modules plug into the EmoTouch 3 unit. Four rooms are run from one panel, with no separate switchboard.

Open to building automation

With the KNX and Modbus module it connects to the hotel management system, and opening hours can be programmed centrally.

Safety as a separate line

Door contact, emergency button, heater guard and EOSafe are available as separate products. In a commercial facility they are not optional.

Spare parts stock

We keep spare parts in stock in Istanbul for the equipment we install. In a commercial facility, what keeps a cabin closed for months is waiting for parts.

Around 20 years with EOS

We have been installing EOS equipment for around 20 years, so we know from site work how each unit performs in each room volume.

Frequently asked questions

Who manufactures the EOS E-Cool Wall B?

EOS Saunatechnik, in Germany. Sauna Dekor sizes, supplies and installs it; the product warranty and certificates are the manufacturer's.

Does Sauna Dekor install the EOS E-Cool Wall B?

Yes. We size, supply and install the EOS E-Cool Wall B as part of the spa cold areas we design, manufacture and build, in the Gulf and our other markets.

What are the main specifications of the EOS E-Cool Wall B?

Category: Ice machines; Series: Classic series; Manufacturer: EOS Saunatechnik · Germany; Capacity: Selected by cabin volume. Values are from the manufacturer's published product information.

Sources

EOS E-Cool Ice Machines

Close alternatives

EOS E-Cool Wall BEIce machines EOS LSG Sauna moduleAccessories and modules EOS LSG Hammam moduleAccessories and modules

Is the EOS E-Cool Wall B right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Request a quote +971 58 558 1295

Material information is the manufacturer's product specification. In the cabins we build ourselves we use ayous, aspen and pine, including their thermo-treated versions; hemlock, red cedar and alder on request.

Updated: 29 October 2026