Blumenberg Kühlaggregat P-Ch 3,2Request a quote

Blumenberg Kühlaggregat P-Ch 3,2 — manufacturer's product image

Photo: Blumenberg GmbH

Blumenberg Kühlaggregat P-Ch 3,2 — ice bath chiller

Blumenberg

Short answer: The Blumenberg Kühlaggregat P-Ch 3,2 is an ice bath chiller that Foceedo makes for Blumenberg (model E10) to run with Blumenberg cold tubs. Sauna Dekor specifies it with the tub, supplies it and installs it; the product and its warranty are the manufacturer's.

Power: 1.0 HP
Temperature range: 2–42 °C
Power input: 1160 W
Compressor: 900 W
Cooling capacity: 3150 W
Heating capacity: 4150 W

Request a quote

Model note

What the Blumenberg Kühlaggregat P-Ch 3,2 is

The P-Ch 3,2 is the all-in-one chiller Blumenberg sells with its cold tubs. It is made for Blumenberg by Foceedo (model E10) and combines the cooling unit, pump, pre-filter, 20 µm fine filter and ozone generator in one housing.

It connects to the tub with the supplied 1/2-inch hoses and plugs into a 230 V socket. It can also heat the water.

Close alternatives we also supply and install: the Blumenberg Kühlaggregat P-Ch 5,7 (Up to 5.75 kW cooling, 2 kW input), the Blumenberg professionelle Kühltechnik (Chiller, pump, sand filter, UV), the Blumenberg Double Tub (Hot tub and cold tub side by side). The Blumenberg overview lists every range.

Technical specifications

Blumenberg Kühlaggregat P-Ch 3,2 specifications

Power	1.0 HP
Temperature range	2–42 °C
Power input	1160 W
Compressor	900 W
Cooling capacity	3150 W
Heating capacity	4150 W
Dimensions	582 × 444 × 553 mm
Refrigerant	R410A (360 g)
Filtration	pre-filter + 20 µm, integrated ozone generator
Controls	touch display, Wi-Fi app
Protection	IPX5
Connections	1/2-inch hoses, 230 V socket

Values: Blumenberg GmbH's published product information on blumenberg-gmbh.de (read 29 October 2026). Figures not listed here are confirmed with the manufacturer before ordering.

Frequently asked questions

Who manufactures the Blumenberg Kühlaggregat P-Ch 3,2?

Foceedo makes it for Blumenberg as model E10, and Blumenberg supplies it with its cold tubs. Sauna Dekor specifies, supplies and installs it; the product warranty is the manufacturer's.

Does Sauna Dekor install the Blumenberg Kühlaggregat P-Ch 3,2?

Yes. We specify it on our drawing, supply it and install it as part of the home and hotel spas we design and build, in the Gulf and our other markets.

What are the main specifications of the Blumenberg Kühlaggregat P-Ch 3,2?

Power: 1.0 HP; Temperature range: 2–42 °C; Power input: 1160 W; Compressor: 900 W. Values are from the manufacturer's published product information.

Does a Blumenberg cold tub need a chiller?

Not always. Filled with mains water it stays at mains temperature; a chiller is added where the water has to be colder or held at a set temperature. Blumenberg fits flow and return connections in the tub wall for it.

Sources

Blumenberg

Close alternatives

Blumenberg Kühlaggregat P-Ch 5,7Up to 5.75 kW cooling, 2 kW input Blumenberg professionelle KühltechnikChiller, pump, sand filter, UV Blumenberg Double TubHot tub and cold tub side by side

Is the Blumenberg Kühlaggregat P-Ch 3,2 right for your project?

Send the dimensions, the number of users and the available electrical supply; we will check the fit with you.

Request a quote +971 58 558 1295